Author Topic: Heat Treating Question?  (Read 377 times)

Offline Dan Landis

  • Trad Bowhunter
  • **
  • Posts: 1145
Heat Treating Question?
« on: January 30, 2011, 12:08:00 PM »
I heat treated a HHB bow last weekend and stored it in our bathroom (no basement).  Since then I have weighed it almost every day and it has not gained any weight back, not even 1/10th of an ounce.  My questions are; should I see a weight gain, and is it safe to start exercising the limbs and completing final tiller?  This is my trade bow and I don't want to ruin it.

Thanks,   Dan

Offline Art B

  • Trad Bowhunter
  • **
  • Posts: 1398
Re: Heat Treating Question?
« Reply #1 on: January 30, 2011, 01:14:00 PM »
Sounds like the air inside your house is just as dry as your heat treated bow. Do you know the R/H inside your house? If your answer is no then don't start exercising your bow. Go get a humidity/temperature gauge/monitor. Got mine at Wally world for about 7 bucks. You want your wood at least 8-10% MC so you're going to need between 40-50 R/H to achieve that.........Art

Offline Dan Landis

  • Trad Bowhunter
  • **
  • Posts: 1145
Re: Heat Treating Question?
« Reply #2 on: January 30, 2011, 02:06:00 PM »
Thanks Art, I have 2 gauges, one is reading 57%, the other is reading 39%.  Sounds like the 39% one is probably correct, I'll pick up a 3rd one just to compare.
Do you have any idea how much weight gain I should see?........Dan

Offline Art B

  • Trad Bowhunter
  • **
  • Posts: 1398
Re: Heat Treating Question?
« Reply #3 on: January 30, 2011, 03:21:00 PM »
Don't have any idea of the physical weight gain on bows Dan. If that 39% R/H is close then I wouldn't worry about working on the bow. A week is way more than enough time to rehydrate IMO. When I jump on something that I think may have a low M/C I use a temporary backing of nylon strapping tape. Since bows are apt to break in tension when dry a little added insurance really helps......Art

Offline ber643

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 9205
Re: Heat Treating Question?
« Reply #4 on: January 31, 2011, 07:11:00 PM »
What section of WallyWorld would I find the guage in, Art. Sounds like a handy thing to have around in general. (I assume we are not talking about one of those "ship" types that have the three guages (temp/barometric pressure/humidity) which I have one of.) Does this sound like a "DUH!"? - LOL
Bernie: "Hunters Are People Too"

Ret'd USMC '53-'72

Traditional Bow Shooters of West Virginia (Previously the Official Dinosaur Wrangler, Supporter, and Lifetime Honorary Member)
TGMM Family of the Bow

Offline Dan Landis

  • Trad Bowhunter
  • **
  • Posts: 1145
Re: Heat Treating Question?
« Reply #5 on: January 31, 2011, 07:51:00 PM »
Art, thanks again for the info.  I like the idea of using the nylon strapping tape as insurance. I'll give it a try.....Dan

Offline Art B

  • Trad Bowhunter
  • **
  • Posts: 1398
Re: Heat Treating Question?
« Reply #6 on: February 01, 2011, 06:27:00 AM »
Houseware/hardware section Bernie. Bought one for inside where I keep my bows and one for the shop. And just to have one to check against the other   :D  .......Art

Offline ber643

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 9205
Re: Heat Treating Question?
« Reply #7 on: February 01, 2011, 06:42:00 AM »
Thanks, Art - I'll take a look-see next trip to WW.
Bernie: "Hunters Are People Too"

Ret'd USMC '53-'72

Traditional Bow Shooters of West Virginia (Previously the Official Dinosaur Wrangler, Supporter, and Lifetime Honorary Member)
TGMM Family of the Bow

Offline Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15009
Re: Heat Treating Question?
« Reply #8 on: February 01, 2011, 10:16:00 AM »
You probably shouldn't use heat on an already glued up bow. If anything heat treat the belly lam before glue up. The heat can and will deteriorate most glues.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©