Author Topic: hickory set and splinter  (Read 432 times)

Offline flungonin

  • Trad Bowhunter
  • **
  • Posts: 245
hickory set and splinter
« on: February 01, 2011, 10:44:00 PM »
I have a stave hickory that has taken a couple of inches set. I heard that if it's put in water that it will regain it's natural form. Also steaming it to straighten it back out. My concern is steaming it might make it to dry brittle. The handle does bend and it's only pulling #43 at 28.
  Secondly I have a #100 Warbow that has a splinter in the topbend of bow. The bows handle is completly round the limbs are massive pyramid shaped and bend drastically back toward the archer the last 12 inch of the bow. 68 inch bow. I have read where super glue/gel wroks on some or most splinters but this is on a bend and it's on a heavy bow.

Offline John Lipinski

  • Trad Bowhunter
  • **
  • Posts: 219
Re: hickory set and splinter
« Reply #1 on: February 02, 2011, 12:20:00 AM »
personally, I would leave the warbow and accept it as a loss; dealing with that much poundage is fairly scary. If you draw it back and it snaps, you could get yourself into a world of hurt.

Others chime in as I am not as experienced

Pictures will help

Offline Aznboi3644

  • Trad Bowhunter
  • **
  • Posts: 142
Re: hickory set and splinter
« Reply #2 on: February 02, 2011, 12:49:00 AM »
Hickory loves being dry.

I keep my hickory bow (45@26") next to my water heater to keep the MC low.

I'd heat treat an inch or two of reflex into the bow and retiller after.

I had 2" of set with my bow before heat treating and after the heat the bow became a really fast shoot and settles down to zero set with only 1.5" string follow.

Offline Roy Steele

  • Trad Bowhunter
  • **
  • Posts: 1087
Re: hickory set and splinter
« Reply #3 on: February 02, 2011, 08:00:00 AM »
Once your gets set in it it's there. Damaged wood cells is what caused it and they can't be repaired.
   With war bow just keep it to look at. Thata a lot of poundage. Not wort trusting any prepair.I seen so bad wounds for high poundage bows.
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
 20 YEARS LEARNING 20 YEARS DOING  20 YEARS TEACHING
  CROOKETARROW

Offline okie64

  • Trad Bowhunter
  • **
  • Posts: 761
Re: hickory set and splinter
« Reply #4 on: February 02, 2011, 09:51:00 AM »
I would heat-treat a couple inches of reflex into your hickory bow. Hickory performs better at low mc than probably any other wood. It will gain 8-10 lbs of weight with heat-treating. I dont know about your warbow, I have never dealt with that kind of poundage before. I just fixed a splinter on a hickory bow a few days ago. The guys on here told me to wrap it with dental floss and superglue. I'll let you know how it turns out.

Offline John Scifres

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 4540
Re: hickory set and splinter
« Reply #5 on: February 02, 2011, 10:25:00 AM »
Sometimes set can be "fixed" but don't expect a miracle.

Here's one I made better:    Fixit  

I'd lighten up the wanted to take a chance on fixing the splinter.
Take a kid hunting!

TGMM Family of the Bow

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©