If I am making a 48" youth longbow and I notice that there is too much bend at the fades and not enough along the rest of the limb and I want to shift that bend up a bit more in the limb do I start my taper further up in the limb?
For example, my limbs at the fadeouts are 18" long. I have been running a sraight taper from the fade outs to the tips. The bow is 1" wide at the fadeouts and the tips are 3/8" wide. To achieve a more uniform bend where along the limb should my taper start?
BTW these bows are all under 20# @18"
Matt
Topic: 48" Youth Bow Design Question (Read 289 times)
