Author Topic: paradox question  (Read 343 times)

Offline fujimo

  • Trad Bowhunter
  • **
  • Posts: 3619
paradox question
« on: March 19, 2011, 03:23:00 PM »
any ideas on how much the paradox factor assists arrow/fletch clearance.
in other words a shelf cut past center- so the shaft passes at center- shot with a really stiff shaft- one can assume that the fletches might bumb the shaft out- is this incorrect, or so negligible that it doesnt warrant concern.
and if not, then if one is not using a fancy fall away rest or biscuit, then one would actually be better off with a designed in paradox factor, even if it is only of a minimal degree.??!!!??
wayne

Offline Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15009
Re: paradox question
« Reply #1 on: March 19, 2011, 05:11:00 PM »
All arrows paradox when shot. That is just physics. How much depends on the flexability of the shaft.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline fujimo

  • Trad Bowhunter
  • **
  • Posts: 3619
Re: paradox question
« Reply #2 on: March 19, 2011, 05:15:00 PM »
mmm, thats why i made mention of the really stiff shaft,
well,so then the question is redundant i geuss!

Offline Mike Most

  • Trad Bowhunter
  • **
  • Posts: 927
Re: paradox question
« Reply #3 on: March 19, 2011, 08:23:00 PM »
I have been shooting cock feather out for years, (3 fletch) and just recently a feller older than me (I am 61) suggested I try cock feather in, as I would get better clearance, paradox would clear that cock feather. I am surprised at how much difference it makes... FWIW... Looking down on the arrow from the back my left feather always gets raggedy from shelf contact.(this flip may remedy that for me)
"It Shall be Life" (Ten Bears to Josie Wales)
------------------                Michael Most-Adkins Texas

Offline SEMO_HUNTER

  • Trad Bowhunter
  • **
  • Posts: 2792
Re: paradox question
« Reply #4 on: March 19, 2011, 09:21:00 PM »
You would think shooting it that way would wear down your cock feather even worse? I've read many times that if your arrow is spined correctly for the bow that the arrow will fly true regardless.
I just can't bring myself to do it, goes against everything I've ever been told I guess?
~Varitas Vos Liberabit~ John 8:32

Offline fujimo

  • Trad Bowhunter
  • **
  • Posts: 3619
Re: paradox question
« Reply #5 on: March 19, 2011, 09:46:00 PM »
for some reason, i have found some arrows consistantly fly better cock feather in, others the other way- i check them all.
so the question is, is it advantagous to build in some paradox into the bow design( still considering what Pat said!!), or rather to get the shaft to pass at center- (considering it would be a glass bow- making it easier).

Offline Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15009
Re: paradox question
« Reply #6 on: March 19, 2011, 11:04:00 PM »
Properly spined arrows will clear the bow, center shot or 3/4" off center. It is the arrow that paradoxes not the bow. The bow just pushes the arrow.
  If you checked those arrows you will probably find the stiffest side of the arrow shoots best against the bow.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline macbow

  • Trad Bowhunter
  • **
  • Posts: 2870
Re: paradox question
« Reply #7 on: March 20, 2011, 09:21:00 AM »
The bow design does effect what spine arrow will be required though. Cut to center bows will be able to use a wider range of spines especially heavier spines. A longbow shot off the fist uses a lighter spined arrow generally.
So I'd suggest the bow design is mostly what you like
because you can find arrows to match the bow. A cut to center design gives you more adjustment options with the rests etc.
On my trad bows I like shooting off the fist or a floppy rest and have no problems matching arrows to the bow.
Ron
United Bowhunters of Mo
Comptons
PBS
NRA
VET
"A man shares his Buffalo". Ed Pitchkites

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©