« previous next »
Pages: [1]   Go Down

Author Topic: Refinish Question  (Read 375 times)

Offline yaderehey

  • Trad Bowhunter
  • **
  • Posts: 248
Refinish Question
« on: March 21, 2011, 11:21:00 PM »
I am working on refinishing a riser that is made from cocobolo.  I know there can be some problems with the oily nature of this wood.  I was going to use tru-oil for the finish.  Should it stick OK to the cocobolo?  If I need to seal the wood what should I use?  Thanks in advance for any help!
Logged

Offline PEARL DRUMS

  • Trad Bowhunter
  • **
  • Posts: 3457
Re: Refinish Question
« Reply #1 on: March 22, 2011, 06:54:00 AM »
Wipe it down with acetone until the rag stays almost clean with very little orange on it. Seal it with super glue, use some 600 grit to smooth it back down and put your Tru Oil on normally. The Tru Oil alone will not hold back the oils.
Logged

Offline JJB

  • Trad Bowhunter
  • **
  • Posts: 1719
Re: Refinish Question
« Reply #2 on: March 22, 2011, 06:21:00 PM »
I haven'd sealed a bow with super glue then tru oil before but I'm thinking about it on my next project.  I've used deft on cocobolo with good luck.
Logged

Offline PEARL DRUMS

  • Trad Bowhunter
  • **
  • Posts: 3457
Re: Refinish Question
« Reply #3 on: March 22, 2011, 08:54:00 PM »
I couldnt get Deft to dry on mine, thats where the super glue came in. Im sure every piece has different amounts of oil leaching out. The super glue sounds wierd and a pain, but quite honestly it spreads and covers very easily.
Logged

Offline copicasso

  • Trad Bowhunter
  • **
  • Posts: 134
Re: Refinish Question
« Reply #4 on: March 24, 2011, 06:51:00 PM »
I have put tru oil over super glue and had great results.
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©