Author Topic: differant bow making (Read 447 times)

blacktailchaser · « **on:** June 04, 2011, 12:28:00 PM »

all right i had an idea

i dont know what its called BUT i want to take a peice of yew and glue some ash lams on the back..yew wood was chopped on one side to let water out and even thought the sap wood is gone i can still use the heart wood..SO,with the ash is it ok to glue on 2 short peices 32"LONG or does it have to be one long peice also what is s good glue title bonds work..and does the wood need to be scored...thanks john

Pat B · « **Reply #1 on:** June 04, 2011, 01:41:00 PM »

John, you can join the ash at the handle with a simple scarf joint. I would add an overlay for security though. Ash would be OK for this too.

blacktailchaser · « **Reply #2 on:** June 04, 2011, 03:04:00 PM »

o.k pat that sounds great..i might try some hickory...

Pat B · « **Reply #3 on:** June 04, 2011, 03:24:00 PM »

If you have hickory for the backing I would use that instead of the ash.

blacktailchaser · « **Reply #4 on:** June 04, 2011, 05:28:00 PM »

so pat,what about glue..and i would have to cut my own lams so what is a good thickness for the hickory..thanks john

Pat B · « **Reply #5 on:** June 04, 2011, 08:41:00 PM »

For the hickory backing cut it to 3/16" and sand it down to 1/8" or slightly less. You can use TB glue or Urac if you have it.

News:

Author Topic: differant bow making (Read 447 times)

blacktailchaser

differant bow making

Pat B

Re: differant bow making

blacktailchaser

Re: differant bow making

Pat B

Re: differant bow making

blacktailchaser

Re: differant bow making

Pat B

Re: differant bow making

Users currently browsing this topic: