« previous next »
Pages: [1]   Go Down

Author Topic: Help with draw weight  (Read 305 times)

Offline Mckenzie

  • Trad Bowhunter
  • **
  • Posts: 42
Help with draw weight
« on: June 15, 2011, 10:41:00 PM »
The bow I just glued up seems a bit light by the way it is flexing.  Does anyone have a way to test draw weight before filing string grooves?  I'd rather know the weight before I glue on tip overlays in case I need to shorten it.  It is a R/D 66" longbow.  Any help is appreciated.  MK
Logged

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: Help with draw weight
« Reply #1 on: June 15, 2011, 10:44:00 PM »
I cut the grooves and check , then glue on overlays. Or if it seems stiff, cut em a couple inches long....
Logged
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Online jess stuart

  • Trad Bowhunter
  • **
  • Posts: 1722
Re: Help with draw weight
« Reply #2 on: June 16, 2011, 09:07:00 PM »
I never tried it but, I wonder if tying a set of temporary nocks on like are used on some wooden bows.  One could shorten it without cutting in nocks, and adjust as needed.  Might be worth trying.
Logged

Offline red hill

  • Trad Bowhunter
  • **
  • Posts: 2025
Re: Help with draw weight
« Reply #3 on: June 16, 2011, 09:58:00 PM »
That's what I was wondering, Jess. Worth a shot.
Stan
Logged

Offline Trux Turning

  • Trad Bowhunter
  • **
  • Posts: 1814
Re: Help with draw weight
« Reply #4 on: June 16, 2011, 10:09:00 PM »
I think with a 66 incher-you can either go with the temporary nocks or cut some in without overlays.
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©