« previous next »
Pages: [1]   Go Down

Author Topic: Air hose help....  (Read 393 times)

Offline Badwithabow

  • Trad Bowhunter
  • **
  • Posts: 309
Air hose help....
« on: August 03, 2011, 09:12:00 PM »
I swear if I had a glue up go %100 right I'd freak out lol... well i blow her up to 65 psi and i hear a hissss... the dern stem is letting air out... grrrrrr well everything is glued and ready to go... so I improvised and grabbed my painters tape rapped a piece on it and screwed the cap on tight... and no leak but thats not a perm solution can i grab these from wally world or somethin??

PS this is a set up from Binghams....
Logged
Brandon Moore
Rome,Ga

Offline jsweka

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3571
Re: Air hose help....
« Reply #1 on: August 03, 2011, 09:18:00 PM »
Hmmmm....I got mine from Binghams too.  I'm not sure where else to get them.

So did the bow set up OK?
Logged
>>>---->TGMM<----<<<<

Offline Badwithabow

  • Trad Bowhunter
  • **
  • Posts: 309
Re: Air hose help....
« Reply #2 on: August 03, 2011, 09:19:00 PM »
yea everything is ok right now i'm goin to check pressure in 20-30 min.... make sure its holding... I just got this bow in the oven.....
Logged
Brandon Moore
Rome,Ga

Offline 2treks

  • Trad Bowhunter
  • **
  • Posts: 5193
Re: Air hose help....
« Reply #3 on: August 03, 2011, 09:24:00 PM »
Just get a schrader valve tool and tighten the schrader valve. Sometimes you can use a tiny screw driver or a pick and snug it uo to get you by.
Logged
C.A.Deshler
United States Navy.
1986-1990


"Our greatest fear should not be of failure but of succeeding at things in life that don't really matter.”
~ Francis Chan

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17318
Re: Air hose help....
« Reply #4 on: August 03, 2011, 09:26:00 PM »
If its just the core, a tool from the farm store or auto parts store and a pack of cores will fix ya up. Wally may have em too, never looked.
Logged
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline Badwithabow

  • Trad Bowhunter
  • **
  • Posts: 309
Re: Air hose help....
« Reply #5 on: August 03, 2011, 09:32:00 PM »
o crap well i just checked and i'm still loosing pressure... went from 65-45.... how do i fix this with a screw driver??? thats about my only option at 930 out here...
Logged
Brandon Moore
Rome,Ga

Offline Badwithabow

  • Trad Bowhunter
  • **
  • Posts: 309
Re: Air hose help....
« Reply #6 on: August 03, 2011, 09:33:00 PM »
the part that is leaking is the actual part that you push to let air out....
Logged
Brandon Moore
Rome,Ga

Offline 2treks

  • Trad Bowhunter
  • **
  • Posts: 5193
Re: Air hose help....
« Reply #7 on: August 03, 2011, 09:36:00 PM »
Just get in there and turn it. You should be able to see a spot that you can stick the tip of the screw driver into. Get it outta the oven until you stop the leak. Turn the screw driver just like you would if it was  a screw. You need a pocket size screw driver.
Logged
C.A.Deshler
United States Navy.
1986-1990


"Our greatest fear should not be of failure but of succeeding at things in life that don't really matter.”
~ Francis Chan

Offline Badwithabow

  • Trad Bowhunter
  • **
  • Posts: 309
Re: Air hose help....
« Reply #8 on: August 03, 2011, 09:43:00 PM »
CHUCK YOU ARE THE MAN!!!!! lol kenny you are still the man too lol... just ran out had just the right driver and walla no mo leak.. .thank YOU!!!
Logged
Brandon Moore
Rome,Ga

Offline 2treks

  • Trad Bowhunter
  • **
  • Posts: 5193
Re: Air hose help....
« Reply #9 on: August 03, 2011, 09:45:00 PM »
I was just mostly guessing. that has not happened to me or anything!  ;)
Logged
C.A.Deshler
United States Navy.
1986-1990


"Our greatest fear should not be of failure but of succeeding at things in life that don't really matter.”
~ Francis Chan

Offline 2treks

  • Trad Bowhunter
  • **
  • Posts: 5193
Re: Air hose help....
« Reply #10 on: August 03, 2011, 09:47:00 PM »
Get a tool tho!!! It will never be used again but it is better to have and not need than need and not have.
Any place that sells/fixes tires should have a schrader valve tool.
(or a core tool  ;) )
Logged
C.A.Deshler
United States Navy.
1986-1990


"Our greatest fear should not be of failure but of succeeding at things in life that don't really matter.”
~ Francis Chan

Offline Badwithabow

  • Trad Bowhunter
  • **
  • Posts: 309
Re: Air hose help....
« Reply #11 on: August 03, 2011, 10:04:00 PM »
lol i will get one tom, yea i can honestly tell that had never happened to ya... its just amazing how you even guessed that thing had a lil place for a screw driver....

AHHHHH you my friend must have slept at a Holiday end Express last night....

LOL thanks bud
Logged
Brandon Moore
Rome,Ga

Offline Robertfishes

  • Trad Bowhunter
  • **
  • Posts: 3490
Re: Air hose help....
« Reply #12 on: August 03, 2011, 10:50:00 PM »
Brandon looks like we were glueing up bows at the same time..I also put one in the oven tonight, a 58" recurve .. glad you got the leak fixed, tomorrow I am going to the auto parts store and buying a couple of spare scrader valves and the little tool to install them. I keep a complete spare hose arround just in case of a hose/plug failure, my spare is also long enough to fit my 64" longbow form..
Logged

Offline Badwithabow

  • Trad Bowhunter
  • **
  • Posts: 309
Re: Air hose help....
« Reply #13 on: August 03, 2011, 10:53:00 PM »
ha cool must be something in the southern air lol... Mine is a 54in long bow.... I'll post pics if you do... yea I need to order me a spare as well...
Logged
Brandon Moore
Rome,Ga

Offline milehi101

  • Trad Bowhunter
  • **
  • Posts: 133
Re: Air hose help....
« Reply #14 on: August 03, 2011, 11:34:00 PM »
It is a good idea to check the hose to see if it holds pressure by putting the inflated hose ends in a bucket of water and be sure they dont leek.  I think that Bingham also recommends that. I have had one of their hoses for about 12 years and I still check it before it is time to use it.  Sometimes the clamps need tightened and I have also had the valve loosen up like you did but caught it before glue up.
Logged

Offline **DONOTDELETE**

  • Trad Bowhunter
  • **
  • Posts: 10441
Re: Air hose help....
« Reply #15 on: August 04, 2011, 01:11:00 AM »
That is a very good reason to use heat strips instead of a hot box. The bow only needs to cook for 20-30 minutes, and the hose only stays under pressure for an hour or so...

If you end up with a slow leak you can just add some air until it's done, then repair your hose.
Logged

Offline 2treks

  • Trad Bowhunter
  • **
  • Posts: 5193
Re: Air hose help....
« Reply #16 on: August 04, 2011, 06:56:00 AM »
Good point Kirk. Hose pressure going up and down a few times can be trouble.

I have lots of hose but I do not have any plugs at this time.
Logged
C.A.Deshler
United States Navy.
1986-1990


"Our greatest fear should not be of failure but of succeeding at things in life that don't really matter.”
~ Francis Chan

Offline Robertfishes

  • Trad Bowhunter
  • **
  • Posts: 3490
Re: Air hose help....
« Reply #17 on: August 04, 2011, 05:09:00 PM »
Brandon, just pulled mine out of the form..after sanding smooth on squeeze out off I snapped a few quick pics.  
Logged

Offline **DONOTDELETE**

  • Trad Bowhunter
  • **
  • Posts: 10441
Re: Air hose help....
« Reply #18 on: August 07, 2011, 11:52:00 PM »
Quote
Originally posted by Two Tracks:
Good point Kirk. Hose pressure going up and down a few times can be trouble.

I have lots of hose but I do not have any plugs at this time.
here ya go....    http://www.binghamprojects.com/proddetail.php?prod=302PLUG

those are some good looking veneers robert.   :clapper:
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©