« previous next »
Pages: [1]   Go Down

Author Topic: Jig Building Day  (Read 411 times)

Offline matts2

  • Trad Bowhunter
  • **
  • Posts: 306
Jig Building Day
« on: August 28, 2011, 08:10:00 PM »
I am getting everything ready to attempt to build 3 piece takedowns.  I have my form almost done but today I decided to work on laying out the riser and wedges.  I went ahead and built a couple jigs for the table saw to make life easier.

I am going off the Bingham's pronounced longbow plans.  This jig is for the riser.  Clamp the wood in it and cut the angle on one side.  Flip the wood and cut the angle on the other side.

 
 
 
 

This one is for cutting the wedges.  I went with a wedge with a flat.

 
 
 
Logged
Matt

Offline Trux Turning

  • Trad Bowhunter
  • **
  • Posts: 1814
Re: Jig Building Day
« Reply #1 on: August 28, 2011, 08:12:00 PM »
Nice! Those will make your life easier.
Logged

Offline fish n chicks

  • Trad Bowhunter
  • **
  • Posts: 668
Re: Jig Building Day
« Reply #2 on: August 30, 2011, 08:26:00 PM »
Glad I saw this thread! Thanks for posting Matts2.
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©