Author Topic: ELM TREES  (Read 633 times)

Offline wildcat hunter

  • Trad Bowhunter
  • **
  • Posts: 225
ELM TREES
« on: September 27, 2011, 05:37:00 PM »
This past week my wife and I were up at our cabin in Restoule, Ontario, Canada. While ther I wandered around on the 50 acres and came across some dead 5-6" trees. I had no idea what they were so I took some bark and cut a cross section from one and some leaves from one that is still alive to get them identified. Turned out they are Red Elm. I'm thinking next year when we go up again I could cut some and bring them back to work on. " I know Elm carry bugs so I plan on squaring them - removing all bark etc to have just wood". Will they make a good stave or should I not bother? Anyone have experence with ELM.

Offline mwosborn

  • Trad Bowhunter
  • **
  • Posts: 1678
Re: ELM TREES
« Reply #1 on: September 27, 2011, 08:05:00 PM »
Wildcat Hunter - can't help you with the questions - sorry.  Was just curious how you id them as red elm?  Was told we had some red elm around here but I don't know how to id it.

Carpenter friend of mine was real interested in it - so must be good for something!
Enjoy the hunt!  - Mitch

Offline Balding Kansan

  • Trad Bowhunter
  • **
  • Posts: 366
Re: ELM TREES
« Reply #2 on: September 27, 2011, 08:08:00 PM »
The first selfbow I learned to shoot with when I was 8 years old was red elm. 17 years later and it still shoots just fine. It will make a bow.
I hate rudeness in a man...won't tolerate it. -Lonesome Dove
Hill Country Harvest Master
KennyM Swap bow

Offline wildcat hunter

  • Trad Bowhunter
  • **
  • Posts: 225
Re: ELM TREES
« Reply #3 on: September 27, 2011, 08:37:00 PM »
We looked up trees of Ontario on the net. Compared the leaves, bark and wood. The core is red, the sapwood is of course white.

Offline mwosborn

  • Trad Bowhunter
  • **
  • Posts: 1678
Re: ELM TREES
« Reply #4 on: September 27, 2011, 09:40:00 PM »
Thanks - sounds like it will make a bow!  I would try it.
Enjoy the hunt!  - Mitch

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: ELM TREES
« Reply #5 on: September 27, 2011, 10:48:00 PM »
Red elm makes a very good bow. I built a 60" static recurve for the TG Bow Trade last winter.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline okie64

  • Trad Bowhunter
  • **
  • Posts: 761
Re: ELM TREES
« Reply #6 on: September 28, 2011, 08:03:00 AM »
Quote
Originally posted by mwosborn:
Wildcat Hunter - can't help you with the questions - sorry.  Was just curious how you id them as red elm?  Was told we had some red elm around here but I don't know how to id it.

Carpenter friend of mine was real interested in it - so must be good for something!
Red elm and slippery elm are the same thing. Red elm usually has bigger leaves than american elm. Also the leaves are hairy on top and bottom of red elm. Easiest way to tell is by looking at the wood. Red elm sapwood is white and only bout 1/2" thick and the heartwood is reddish-brown.

Offline wildcat hunter

  • Trad Bowhunter
  • **
  • Posts: 225
Re: ELM TREES
« Reply #7 on: September 28, 2011, 10:40:00 AM »
Thanks guys, I'll try a couple next year and see how they work out. I guess the trees will be ok standing there over winter.

Offline Stiks-n-Strings

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 3226
Re: ELM TREES
« Reply #8 on: September 29, 2011, 05:06:00 PM »
I wouldn't cut the dead ones, White woods decay in a hurry and it will likely not make good bow wood. I would cut green ones and season them in your garage.
Striker stinger 58" 55# @ 28
any wood bow I pick off the rack.
 2 Cor. 10:4
 TGMM Family of The Bow
 MK, LLC Shareholder
Proud Member of the Twister Twelve

Offline mater

  • Trad Bowhunter
  • **
  • Posts: 419
Re: ELM TREES
« Reply #9 on: October 01, 2011, 09:52:00 AM »
5-6" trees are kinda small for a self bow. Would have a round back. Would be good for laminated bows or backed bows though.


     Mark

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: ELM TREES
« Reply #10 on: October 01, 2011, 10:00:00 AM »
I'd make a selfbow out of any elm that was 2" in diameter or more. If the back is rounded make the belly as flat as possible.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©