« previous next »
Pages: [1]   Go Down

Author Topic: Laminate TD Recurve limb cracking sounds???  (Read 420 times)

Offline Blue EagleBum

  • Trad Bowhunter
  • **
  • Posts: 254
Laminate TD Recurve limb cracking sounds???
« on: November 12, 2011, 08:53:00 PM »
I built my first TD Recurve. Finished it 11-01-2011. I have noticed that most of the time when I unstring it, and sometimetimes when I string it it makes popping/cracking sounds. Normally once strung it doesen't pop/crack. Is this normal?

There is no apparent cracks or signs of delamination.
Logged
Step lightly, and shoot a trad bow.

Offline John Lipinski

  • Trad Bowhunter
  • **
  • Posts: 219
Re: Laminate TD Recurve limb cracking sounds???
« Reply #1 on: November 12, 2011, 09:13:00 PM »
SO I have that problem too, but I've identified it as the finish sticking at the point where the limbs are attached to one another. If that's what your problem is, I would not worry about it. See if you can identify if that's the case.
Logged

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17340
Re: Laminate TD Recurve limb cracking sounds???
« Reply #2 on: November 12, 2011, 09:31:00 PM »
What John said!

I had to wax mine on one bow and put felt under limbs on the other!

Rushed the finish curing time, makes a bad sounding crack!
Logged
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline strungstick

  • Trad Bowhunter
  • **
  • Posts: 97
Re: Laminate TD Recurve limb cracking sounds???
« Reply #3 on: November 12, 2011, 10:03:00 PM »
A piece of that clear shelf liner works pretty well also.  Once cut to size you really can't see it between the limb and the riser.  No more squeaks or cracks from the finish.
Logged

Offline Cruiser78

  • Trad Bowhunter
  • **
  • Posts: 90
Re: Laminate TD Recurve limb cracking sounds???
« Reply #4 on: November 12, 2011, 10:08:00 PM »
I put mole skin on mine.
Logged
Some people are like Slinkies ... Not really good for anything,
But they still bring a smile to your face when you push them down a flight of stairs.

Offline Bradford

  • Trad Bowhunter
  • **
  • Posts: 546
Re: Laminate TD Recurve limb cracking sounds???
« Reply #5 on: November 13, 2011, 01:55:00 AM »
Yup... felt.  Craft felt from the craft store.  Goes on all my bows now for that reason.
Logged
God gave you hands, use them

Offline Blue EagleBum

  • Trad Bowhunter
  • **
  • Posts: 254
Re: Laminate TD Recurve limb cracking sounds???
« Reply #6 on: November 13, 2011, 07:44:00 AM »
Thanks guys. I was going over it with a fine tooth comb constantly and never could find anything wrong. I will try one of the above this evening to see. Thanks again.
Logged
Step lightly, and shoot a trad bow.

Offline Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6076
Re: Laminate TD Recurve limb cracking sounds???
« Reply #7 on: November 13, 2011, 02:52:00 PM »
Moving parts need lube or some sort of insalator between them. String wax works for me and does not draw moisture.
Logged
High on Archery.
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©