Author Topic: The right stuff?  (Read 339 times)

Offline monterey

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 4248
The right stuff?
« on: December 09, 2011, 07:09:00 PM »
I have some loctite 15 second super glue on hand and wonder if it is the right stuff for glueing limb tip overlays.  Have seen mention of the use of super glue on this forum and wonder what is the right stuff?
Monterey

"I didn't say all that stuff". - Confucius........and Yogi Berra

Offline okie64

  • Trad Bowhunter
  • **
  • Posts: 761
Re: The right stuff?
« Reply #1 on: December 09, 2011, 08:09:00 PM »
I use gorilla superglue for overlays but I think loctite will work too.

Offline vanillabear?

  • Trad Bowhunter
  • **
  • Posts: 748
Re: The right stuff?
« Reply #2 on: December 09, 2011, 08:33:00 PM »

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15022
Re: The right stuff?
« Reply #3 on: December 09, 2011, 10:32:00 PM »
I use cheap super glue and it works fine. Gel works better but I have used thin too.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20676
Re: The right stuff?
« Reply #4 on: December 10, 2011, 09:00:00 AM »
I use smooth on, down side is waiting till the next day till it's dry.

Offline PEARL DRUMS

  • Trad Bowhunter
  • **
  • Posts: 3457
Re: The right stuff?
« Reply #5 on: December 10, 2011, 09:08:00 AM »
I think it depends on what the overlay is and what your glueing it to. I use TBIII for wood to wood and I use CA glue for bone to wood. Only had one come off after it fell off my tiller tree and whacked the shop floor hard.

Offline monterey

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 4248
Re: The right stuff?
« Reply #6 on: December 10, 2011, 11:00:00 AM »
Had not thought about the obvious advantages of gel.  I'll be going glass to glass or phenolic to glass on some and wood to wood on others.  

Have used smooth on with good results but then there is the long wait and my "shop" (garage and patio) is very cold this time of year.  :(    I can do them at my bench in the garage, but that calls for hanging lights under them for heat overnight.  It works, but being able to do the job in 15 or 20 minutes is waaay appealing.

Thanks for the tips.  As usual this forum is a trove of quality info!  :thumbsup:
Monterey

"I didn't say all that stuff". - Confucius........and Yogi Berra

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©