Author Topic: Ash stave ring violated?  (Read 306 times)

Offline Pete W

  • Trad Bowhunter
  • **
  • Posts: 951
Ash stave ring violated?
« on: February 01, 2012, 11:16:00 AM »
I dun a bad thing.   :(  
 Striping the inner bark from an ash stave with the draw knife I sliped and put a pretty good gouge in the outer wood that should have been the outside of the bow.
 Then trying to recover I atempted to simply go down to the next ring , which is not easy. the rings are thin and it is not co-operating like osage does.
 What is my best option, sand till I am almost to the next ring and them scrape? or use some backing and feather out the violated area?
 I realy don't like cloth backing and don't have any sinue to use.
 Pete
Share your knowledge and ideas.

Offline Nim-rod

  • Trad Bowhunter
  • **
  • Posts: 243
Re: Ash stave ring violated?
« Reply #1 on: February 01, 2012, 11:45:00 AM »
I've chased thin ash rings before and yea it's tough but can be done with a knife scraper. I also had some stain to sharpen up stuff to make it easier to see. Either that or like you said, back it with something. I use linen myself.
Proud to be "regressing"

Offline PEARL DRUMS

  • Trad Bowhunter
  • **
  • Posts: 3457
Re: Ash stave ring violated?
« Reply #2 on: February 01, 2012, 12:14:00 PM »
Rawhide

Offline Art B

  • Trad Bowhunter
  • **
  • Posts: 1398
Re: Ash stave ring violated?
« Reply #3 on: February 07, 2012, 07:01:00 PM »
I believe I would get a nice clean ring from end to end Pete. Ash is ring-porous wood and not the best set up for violated rings IMO. I love rawhide for backing though......Art

Offline Pete W

  • Trad Bowhunter
  • **
  • Posts: 951
Re: Ash stave ring violated?
« Reply #4 on: February 08, 2012, 01:34:00 AM »
I never tried any backing other than cloth and I don't like cloth backings.  But Rawhide might be a thought, and tonight I was offered some sinue, so that is a real posibility.
Pete
Share your knowledge and ideas.

Offline Bowjunkie

  • Trad Bowhunter
  • **
  • Posts: 2324
Re: Ash stave ring violated?
« Reply #5 on: February 08, 2012, 06:14:00 AM »
If I had adequate thickness remaining yet, I would first try to chase a single ring end to end. What do you have to lose? So you may have to back it? Big deal, woulda had to do it anyway. Put the drawknife away though  :)

If chasing the ring didn't work out, which material I used to back the bow with would at least partially be determined by other design features of the bow I had in mind. If it was shorter, narrow, reflexed, recurved, had any descrepencies like knots in the back, or runnout, or otherwise pushing the woods limits, I'd use sinew. If it was long, wide, straight, and cleaner, etc. I'd use rawhide.

Offline Black Mockingbird

  • Trad Bowhunter
  • **
  • Posts: 342
Re: Ash stave ring violated?
« Reply #6 on: February 08, 2012, 06:58:00 AM »
Hmmm??? Spend an hour pulling your hair trying to chase a ring,or taking ten mins to slap on some rawhide??? That should make it more clear...it does for me anyways.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©