Author Topic: arrow smithing  (Read 293 times)

Offline shongexoe

  • Trad Bowhunter
  • **
  • Posts: 63
arrow smithing
« on: February 01, 2012, 11:09:00 PM »
Hey Guys
I didnt see a section for making wood arrows,
or arrow smithing. where should i post questions about arrow building..woods weight ect:

Offline Grey Taylor

  • Trad Bowhunter
  • **
  • Posts: 1546
Re: arrow smithing
« Reply #1 on: February 01, 2012, 11:27:00 PM »
I'd say right here is about as good as any.

Guy
Tie two birds together; though they have four wings, they can not fly.
The Blind Master

Offline shongexoe

  • Trad Bowhunter
  • **
  • Posts: 63
Re: arrow smithing
« Reply #2 on: February 01, 2012, 11:57:00 PM »
is 600- 750g for overall arow weight good for hunting big game,
i use a glass r/d longbow #68

Offline Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15009
Re: arrow smithing
« Reply #3 on: February 02, 2012, 12:02:00 AM »
You could hunt anything in North America and probably on most contenents with that set up if you can put the arrow with a scary sharp broadhead where it needs to go.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Nim-rod

  • Trad Bowhunter
  • **
  • Posts: 243
Re: arrow smithing
« Reply #4 on: February 02, 2012, 12:04:00 AM »
Thats a combo I wouldn't want to be standing in front of. Big heavy arrow like that being pushed with that many pounds is Mastadon Medicine. So yea it would work. Most go with lighter for better trajectory like 450-500g
Proud to be "regressing"

Offline rainman

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 1216
Re: arrow smithing
« Reply #5 on: February 02, 2012, 12:07:00 AM »
Thats 9 to 11 grains per pound of bow weight so it is right in the ballpark for that bow.
Semper Fidelis
Dan Raney

Offline shongexoe

  • Trad Bowhunter
  • **
  • Posts: 63
Re: arrow smithing
« Reply #6 on: February 02, 2012, 12:10:00 AM »
Hey thanks for the info, i am trying to get the weight down a little, but hard to find a wood that that is lighter,or i could buy some ready mades.
but i make my own shafts.

Offline razorback

  • Trad Bowhunter
  • **
  • Posts: 2166
Re: arrow smithing
« Reply #7 on: February 02, 2012, 09:09:00 AM »
The powwow is also a good place to ask these kinds of questions, lots more people over there, not that the bench isn't full of great people who know an awful lot.
Keep the wind in your face and the sun at your back.

Offline Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15009
Re: arrow smithing
« Reply #8 on: February 02, 2012, 03:09:00 PM »
I shoot 600gr to 700gr cane or hardwood shoot arrows from my 55#@26" selfbows. I prefer a heavy arrow.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Art B

  • Trad Bowhunter
  • **
  • Posts: 1398
Re: arrow smithing
« Reply #9 on: February 02, 2012, 03:12:00 PM »
I wouldn't change a thing with that set-up....Art

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©