« previous next »
Pages: [1]   Go Down

Author Topic: First 2 Bow Builds  (Read 464 times)

Offline typical2

  • Trad Bowhunter
  • **
  • Posts: 497
First 2 Bow Builds
« on: February 25, 2012, 11:27:00 AM »
I started to build a take-down recurve a few years ago but I made enough mistakes that I never completed it.

This past summer I bought my first longbow and liked it so much that I hung up the wheels and might not go back.  I am a teacher with three little girls under 3 so I don't have much time to do much.

However, this semester I have a student teacher.  He is doing well so my job is to be out of the room to allow him to do all the teaching.(students are much different when I am there giving them the teacher look)  So...what do I do with a few extra hours a day when we have a shop class that has all the equipment to make bows?  Of course that is a no brainer.  I have access to a straight limbed form with forebode and a hot box.  All the tools I could need.  

I expected these first two bows to be more of a learning process than making nice good shooting bows.  The first bow is like the Hill Sirocco that someone else has copied on a build here.  (Feel a bit bad ripping off a design that somebody else ripped off         ;)         ).  It's flattery right?

   

The stack back to belly:

.050 black uls glass
.100 parallel actionboo
.110 aboo w/ .002 taper
.150 curly maple. 002 taper
.050 clear uls glass
Total of. 460"
Zebra riser

I was looking for around #50 @ 28".

I have a 30" draw and in talking with Steve Turray of Northern Mist Longbows I needed to go with the. 004"per inch of taperand to maintain a little less than 90°great string limb angle at full draw to prevent stacking.

The other bow uses some yew lams from idahocurt.  Beautiful!

The yew bow stack:

.050 clear uls glass
.030? Yew lam
.100 parallel aboo
.110. 002 tapered aboo
.110 .002 tapered aboo
.030 yew lam
 .050 clear uls glass


Total ..470 ish


After glueup and using way too much smooth on this is what I had.

     
Logged

Offline typical2

  • Trad Bowhunter
  • **
  • Posts: 497
Re: First 2 Bow Builds
« Reply #1 on: February 25, 2012, 11:55:00 AM »
I like the contrast with the wenge riser seen on the belly next to the yew
Logged

Offline Trux Turning

  • Trad Bowhunter
  • **
  • Posts: 1814
Re: First 2 Bow Builds
« Reply #2 on: February 25, 2012, 12:09:00 PM »
Looks like you have a good start-I think you will find longbows are easier to build than recurves. It doesn't hurt to have a shop full of tools either-lol
Logged

Offline typical2

  • Trad Bowhunter
  • **
  • Posts: 497
Re: First 2 Bow Builds
« Reply #3 on: February 25, 2012, 12:15:00 PM »
After some work I liked what I had.

 
Logged

Offline typical2

  • Trad Bowhunter
  • **
  • Posts: 497
Re: First 2 Bow Builds
« Reply #4 on: February 25, 2012, 12:23:00 PM »
I wanted to make these as long as possible.  I shoot 70"bow Hills so I wanted it close to that.  I ended up making these 69.25" which is a bit ridiculous.

I liked how the tip overlays came out.  Top two step mine.  Bottom is my Wesley Special.

 

I ended up coming up light on both now so I decided to cut them down to 68".  It wasn't ideal and left the tips stubby looking .  I just need to be a little more careful stringing it.

 
Logged

Offline rmorris

  • Trad Bowhunter
  • **
  • Posts: 1289
Re: First 2 Bow Builds
« Reply #5 on: February 25, 2012, 12:29:00 PM »
Nice! now those are not looking like bows you are not going to finish. Good Job!
Logged
"Havin' such a good time Oo-de-lally, Oo-de-lally Golly, what a day"

Offline typical2

  • Trad Bowhunter
  • **
  • Posts: 497
Re: First 2 Bow Builds
« Reply #6 on: February 25, 2012, 12:30:00 PM »
So here try are.

Curly

   

     

     

     


Yewhoo

     

     

 

     
Logged

Offline typical2

  • Trad Bowhunter
  • **
  • Posts: 497
Re: First 2 Bow Builds
« Reply #7 on: February 25, 2012, 12:38:00 PM »
"Curly is going to an "Athletic Boosters Auction" tonight.  It is a great fund raiser for our schools athletic department and I'm glad to help.  It had better get a couple hundred bucks or I'll bid on it myself.  Hahaha.

I plan to build some more bows.  I might build one for next years auction.  The "Pine River Bow Company" is just getting started.  I've been looking at power tools to start looking for so I can set up my own shop in the next few years.  With three daughters and a wife I'll be spending a lot of time in the garage!
Logged

Offline typical2

  • Trad Bowhunter
  • **
  • Posts: 497
Re: First 2 Bow Builds
« Reply #8 on: February 25, 2012, 12:59:00 PM »


And yes Riley (left) is rubbing her head because Raegan (left) wacked her in the head.  Primitive tool kind of girl  ;)
Logged

Offline jsweka

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3571
Re: First 2 Bow Builds
« Reply #9 on: February 25, 2012, 01:09:00 PM »
Well done!    :clapper:  

I wish my first longbow came out that nice.  They are easier to build than a recurve (I've built one recurve and that is all I am ever planning to build.)

I am a little surprised at your weight given your stack thickness.  If I go with 0.44 total stack for a 68" bow I end up with a bow at about 60# @ 28".  I only use one 0.002 tapered laminaiton, but I wouldn't have thought it would make a 15# difference.
Logged
>>>---->TGMM<----<<<<

Offline typical2

  • Trad Bowhunter
  • **
  • Posts: 497
Re: First 2 Bow Builds
« Reply #10 on: February 25, 2012, 01:17:00 PM »
The weight is lower due to the skinny limbs.  I was planning on making limbs between 1.25 and 1.125.  They came in on the narrow side. I like the skinny limbs though.  
The next bow will start out in the. 590 range with. 006 taper and tip wedges.  That is the recipe of my 58@31 70"  Wesley Special.  

I don't mind having a lighter bow around though.  I'll get some arrows for it so my training wheel friends can enjoy shooting a longbow.  (I like shooting it too)
Logged

Offline jsweka

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3571
Re: First 2 Bow Builds
« Reply #11 on: February 25, 2012, 04:37:00 PM »
Ahhhh.....Skinny limbs.  That makes sense to me now.

I build mine 1.25 at the fades.
Logged
>>>---->TGMM<----<<<<

Offline typical2

  • Trad Bowhunter
  • **
  • Posts: 497
Re: First 2 Bow Builds
« Reply #12 on: February 25, 2012, 11:54:00 PM »
Well..."Curly" was auctioned tonight for $270.  Good price for a great cause.
Logged

Offline Glunt

  • Trad Bowhunter
  • **
  • Posts: 376
Re: First 2 Bow Builds
« Reply #13 on: February 26, 2012, 02:38:00 AM »
Nice looking bows!
Logged

Offline jtbluefeather871

  • Trad Bowhunter
  • **
  • Posts: 118
Re: First 2 Bow Builds
« Reply #14 on: February 26, 2012, 02:42:00 AM »
Nice job! Can't wait to see more from Pine River!   :D    :clapper:    :clapper:
Logged
I learned "Semper Fi" as a Marine, and have lived it every day since.

Offline DVSHUNTER

  • Trad Bowhunter
  • **
  • Posts: 2717
Re: First 2 Bow Builds
« Reply #15 on: February 26, 2012, 08:51:00 AM »
Nice
Logged
"There is a natural mystic flowing through the air; if you listen carefully now you will hear." Bob Marley

Offline red hill

  • Trad Bowhunter
  • **
  • Posts: 2025
Re: First 2 Bow Builds
« Reply #16 on: February 26, 2012, 03:37:00 PM »
Nice bows. Those tips are interesting, too.
And beautiful models! Can they shoot?   :clapper:
Logged

Offline typical2

  • Trad Bowhunter
  • **
  • Posts: 497
Re: First 2 Bow Builds
« Reply #17 on: February 26, 2012, 06:59:00 PM »
I am amazed at how well they shoot.  They are smooth, quiet, and more accurate than me.

I will definitely have some longer sleeker tips on my next bow.   :)
Logged

Offline wookiewebster

  • Trad Bowhunter
  • **
  • Posts: 109
Re: First 2 Bow Builds
« Reply #18 on: February 28, 2012, 03:21:00 PM »
Hey, those look great. It was cool of you to auction one, too.
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©