Urac 185 to glue takedown sleeves?

[mississippidave]

Hey folks,  Just got my billets ready to glue up for the 2012Idaho bearhunt bow im building.  I don't have any smooth on but I do have some Urac, just wondering if ya'll think that would work OK...I'm not sure of it's gap filling properties....Thanks in advance, Dave

[Don Armstrong]

If it has glass or phonlic in it URAC won't work. Don

[Roy from Pa]

URAC has great gap filling properties, but it's for wood to wood only, not for glass like Don has stated.

[2treks]

Epoxy is what you want

[Eric Krewson]

Get some Defcon 30 minute two part epoxy Dave, works great and gives you some wiggle room if you want to make adjustments before it cures.

[mississippidave]

Thanks guys!  Got some Defcon epoxy....I was stoked that I got the sleeve to billet at such a good tolerance....Doesn't always go that way with me...By the way the Krewson fix is holding great Eric!  Shot it yesterday.  It's still my favorite!

[Walt Francis]

When gluing metal to wood I have had excellent results with MT-13.