Author Topic: finish effect handshock?  (Read 484 times)

Offline maineac

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 4005
finish effect handshock?
« on: March 25, 2012, 07:44:00 AM »
I recently refinished a take down longbow that had a small area of finish that had chipped off the back of the top limb.  I went with tru-oil after posting  question on this forum.  It took three coats for me to get the even finish I wanted.  Now the bow has hand-shock that I did not remember from before I refinished it (admittedly I had not shot the bow in a bout a year).  I know it is a total newb question but don't know what else would have changed on the bow.
The season gave him perfect mornings, hunter's moons and fields of freedom found only by walking them with a predator's stride.
                                                              Robert Holthouser

Offline okie64

  • Trad Bowhunter
  • **
  • Posts: 761
Re: finish effect handshock?
« Reply #1 on: March 25, 2012, 08:46:00 AM »
Did you sand one limb more than the other? Hand shock is usually caused by limb timing being off. If you did some sanding and sanded more off of one limb than the other that couldve caused it.

Offline Roy Steele

  • Trad Bowhunter
  • **
  • Posts: 1087
Re: finish effect handshock?
« Reply #2 on: March 25, 2012, 08:48:00 AM »
Hand shock comes from basicly 2 things. The bows tillered to where one limb finishs before the other.
  Or the last 4inchs of the bows tips are to heavy. My bows have no nosisable hand shock. Through good tillering and makeing the last 4 inchs of my tips small to where they just don't been. Never more than 3/8's wood like OSAGE 1/4".
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
 20 YEARS LEARNING 20 YEARS DOING  20 YEARS TEACHING
  CROOKETARROW

Offline johnny girardi

  • Trad Bowhunter
  • **
  • Posts: 76
Re: finish effect handshock?
« Reply #3 on: March 25, 2012, 12:00:00 PM »
I think you may have taken off the string and lost braceheight.check string.Bow finish (tungoil) will not give bow hand shock. John G

Offline maineac

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 4005
Re: finish effect handshock?
« Reply #4 on: March 25, 2012, 12:08:00 PM »
I only did a light sand on the whole bow to give the oil a surface to grab.  I sanded the area around the blemish to get rid of the edges created by the chipped finish, but the area was about the size of a dime.  Ill check the brace height, but whenever I take a string off a bow I loop the ends into each other to prevent the string from unwinding any.
The season gave him perfect mornings, hunter's moons and fields of freedom found only by walking them with a predator's stride.
                                                              Robert Holthouser

Offline Art B

  • Trad Bowhunter
  • **
  • Posts: 1398
Re: finish effect handshock?
« Reply #5 on: March 25, 2012, 12:15:00 PM »
You said you haven't shot this bow in awhile. What have you been shooting other than this bow? Bet you've changed your grip/hand position shooting other bows and then applied that same grip to this bow. Try different hand positions for best limb timing.

Offline Sal

  • Trad Bowhunter
  • **
  • Posts: 277
Re: finish effect handshock?
« Reply #6 on: March 25, 2012, 04:43:00 PM »
Light sanding should not have any effect on the bow.

My guess is the same as Art, its not the bow its your "memory".  Often, a "sweet shooting bow" will feel like a mule after shooting a "sweeter shooting bow".

I used to shoot a Hill style longbow for years and loved it.  I then switched to a reflex/deflex longbow and now the other bow feels like a mule and a dog.

Offline johnny girardi

  • Trad Bowhunter
  • **
  • Posts: 76
Re: finish effect handshock?
« Reply #7 on: March 29, 2012, 01:32:00 PM »
thats true that old sweet shooter you remember may just have turned into a monster

Offline mzombek

  • Trad Bowhunter
  • **
  • Posts: 123
Re: finish effect handshock?
« Reply #8 on: March 29, 2012, 01:38:00 PM »
If your tiller is +1/4" on top limb and your brace hight good, will changing from split fingers to 3 under change hand shock?

Offline 7 Lakes

  • Trad Bowhunter
  • **
  • Posts: 766
Re: finish effect handshock?
« Reply #9 on: March 31, 2012, 11:06:00 AM »
Unless your memory has faded you need to go back to your heavy arrows.

Neither light sanding nor a new finish can cause handshock but light arrows will.

Users currently browsing this topic:

0 Members and 4 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©