Author Topic: python skins (need more help)  (Read 406 times)

Offline rmorris

  • Trad Bowhunter
  • **
  • Posts: 1289
python skins (need more help)
« on: June 17, 2012, 11:27:00 PM »
At the local leather shop they are selling python skins for $40.

Has anyone ever backed a bow with python skins?

Do I also need to remove the scales from the python after glue up?

I also do not want them to be shiny so what finish do you recommend for a good mate finish?
"Havin' such a good time Oo-de-lally, Oo-de-lally Golly, what a day"

Offline DVSHUNTER

  • Trad Bowhunter
  • **
  • Posts: 2717
Re: python skins (need more help)
« Reply #1 on: June 18, 2012, 07:10:00 AM »
I've used python a lot. As long as they were air dried then you are fine to use them. I used to use tou oil on them,but now i mainly use shellac as a finish. You do have to remove the scales first before finishing. The swap thread has pic of my last python skinned bow I think on page 160ish.
"There is a natural mystic flowing through the air; if you listen carefully now you will hear." Bob Marley

Offline rmorris

  • Trad Bowhunter
  • **
  • Posts: 1289
Re: python skins (need more help)
« Reply #2 on: June 19, 2012, 01:58:00 PM »
The guy who wants the skins on his bow also wants the scales left on .  I told him the finish would crack and dirt would get under the scales .... What is the official reason for removing the scales?
"Havin' such a good time Oo-de-lally, Oo-de-lally Golly, what a day"

Offline PEARL DRUMS

  • Trad Bowhunter
  • **
  • Posts: 3457
Re: python skins (need more help)
« Reply #3 on: June 19, 2012, 02:05:00 PM »
Leaving scales on is a bad plan. The finish wont adhere like it should and that just gives moisture a chance to sneak under. Skins look 10x better without scales anyway. The true color comes out vividly.

Offline Mike Yancey

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 1191
Re: python skins (need more help)
« Reply #4 on: June 19, 2012, 02:25:00 PM »
If its air dried the scales are going to come off wheather he wants them on or not once the bow is shot. The pythons have such a fine scale anyway most come off when you soak them and put them on.
Mike

Offline red hill

  • Trad Bowhunter
  • **
  • Posts: 2025
Re: python skins (need more help)
« Reply #5 on: June 19, 2012, 03:12:00 PM »
Many people I've talked to think the color is actually in the scales. They don't realize that the scales are like finger nails and are transparent.

Offline dmikeyj

  • Trad Bowhunter
  • **
  • Posts: 195
Re: python skins (need more help)
« Reply #6 on: June 19, 2012, 04:28:00 PM »
Just tell him that when the scales DO fall off, it will take the protective finish right along with it.
Imagination will often carry us to worlds that never were. But without it we go nowhere.
I love fools' experiments. I am always making them.

Offline rmorris

  • Trad Bowhunter
  • **
  • Posts: 1289
Re: python skins (need more help)
« Reply #7 on: June 19, 2012, 06:32:00 PM »
Alright so I am still a little scared about causing hours of cleanup on a bow that is not mine. So I did a few test strips.  When I attempted to remove the scales  the tape tore the skin and did not remove any scales.... Only a very small corner of the scales actually move at all , and if you try to pull one off it also tears the skin... I got the python skin from Tandy's Leather any one have any suggestions now? Thanks again

 
"Havin' such a good time Oo-de-lally, Oo-de-lally Golly, what a day"

Offline rmorris

  • Trad Bowhunter
  • **
  • Posts: 1289
Re: python skins (need more help)
« Reply #8 on: June 19, 2012, 06:36:00 PM »
Is ther any chance the skins have been descaled from the supplier?
"Havin' such a good time Oo-de-lally, Oo-de-lally Golly, what a day"

Offline PEARL DRUMS

  • Trad Bowhunter
  • **
  • Posts: 3457
Re: python skins (need more help)
« Reply #9 on: June 19, 2012, 06:37:00 PM »
User painters tape and peel it off towards the tail. Duct tape is mean stuff. I use it on thicker skins like canebrake, rat or even big WDB's.

Offline 2treks

  • Trad Bowhunter
  • **
  • Posts: 5193
Re: python skins (need more help)
« Reply #10 on: June 19, 2012, 07:49:00 PM »
Has the skin been tanned? I am not aware of any air dried skins from them.
Like Mike said, if its air dried,the scales will come off.I have never torn an air dried skin while removing scales.
C.A.Deshler
United States Navy.
1986-1990


"Our greatest fear should not be of failure but of succeeding at things in life that don't really matter.”
~ Francis Chan

Offline DVSHUNTER

  • Trad Bowhunter
  • **
  • Posts: 2717
Re: python skins (need more help)
« Reply #11 on: June 19, 2012, 07:54:00 PM »
It looks like the scales are already off. They should come off pretty easy, although on my thicker Skeeredns like the last one I couldn't get tape to pull them off. I ended up using a pink rubber pencil eraser to rub them off. It worked great. Try rubbing them and if nothing comes off then you know.
"There is a natural mystic flowing through the air; if you listen carefully now you will hear." Bob Marley

Offline Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15009
Re: python skins (need more help)
« Reply #12 on: June 19, 2012, 10:39:00 PM »
Those skins are probably tanned and the scales have been removed.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©