Best glue for a beginner?

[Thousandstar]

Hello all
I'm looking for the best glue for a beginning Bowyer. I'm planning on making wood/bamboo laminated ELB's and American flat long bows. What glue would you recommend that wouldn't break the bank.
I'm currently thinking about:
Titebond III
Gorilla Glue
Wood Wield

My first bow was glued using Gorilla glue and I've had good results so far, but I'm wondering if there is a better option.

[Pat B]

I would not use Gorilla glue.
 I think TBIII would be the easiest to work with and easiest to clean up. Just be sure your mating surfaces are well matched and smooth.
  If you have a hot box of at least a heated work area the Weldwood Plastic Resin is an excellent glue also.

[macbow]

As Pat said TB 111 it is not good for filling gaps which can be a problem.

The easiest I find,is Urac 185. Very good at gap filling and doesn't need a hot box.
Just needs to,be warm, I use a light bulb and sleeping bag when it is cold out.

The problem right now is the manufacturer is shutting down.
Mike at Nocking Point still has some. It is cheap and works well.
The distributer says they are working on another supplier.

If it goes away I will try to find Weld wood resorsanal glue.

[Thousandstar]

Is the Weldwood plastic resin glue the same as Weldwood Resorcinol Glue?

[psychmonky]

I dont know if its the same or not. Just google weldwood plastic resin and you get about a million links. From what I hear, its the bee's knees for wood/wood applications. And at <$10 a pound its cheap!

[Pat B]

No they are not the same. Weldwood Plastic Resin is a urea glue that is very similar to Urac 185.

[Thousandstar]

Originally posted by Pat B:
No they are not the same. Weldwood Plastic Resin is a urea glue that is very similar to Urac 185.

Has anyone tried it for bow making?

[macbow]

There was someone, maybe Eric K who said it looked like it was doing well.
I looked for some locally and wasn't successful. Coarse I'm out in the middle of nowhere.
I plan to keep using the Urac 185 till it is gone or replaced.
It cost about $13 and will do about 8 to 10 medium sized R/D glue ups.

[Pat B]

I've used thev Weldwood Plastic Resin on a few backed bows and never had a failure. I used it with hickory and boo backings and on osage, hickory and ipe bellies.

[Thousandstar]

I broke down and bought some Unibond 800. This is the URAC 185 replacement product. We'll see how it goes...

[macbow]

Give us a report when finished.

[Roy from Pa]

How do you know Unibond 800 is the urac replacement? Just curious about that.

[Thousandstar]

I make bamboo fly rods and I'm a member of Clarks Classic Rod forum. There's been a lot of discussion on the topic.

[Roy from Pa]

Well I see it's made by Nelson Paint Company.. Let us know how it works out for you.

   http://www.nelsonpaint.com/urac-185.html

[Roy from Pa]

Dennis, you try the Unibond 800 yet on a bow?

[AkDan]

Thousand...I'm also doing boo rods (morgan handmill), keep me posted on the unibond.

[nitwit]

I also make bamboo fly rods and just finished the last of my URAC.