Osage splinter! Sinew and TBIII or Hide Glue?

[Chad Orde]

Hey Guys,
Finished up a Osage bow and was about to put the finish on but wanted to shoot it one last time and and crack! A very very small splinter on the edge of the limb on the back. Filled the crack with super glue and am going to wrap deer sinew around the limb.
SHOULD I use hide glue or Titebond 3 ?
All the wood glue I used for furniture gets super hard and too brittle maybe? read some where you can use Titebond III for backing a bow and its water proof Viola??
Thanks
 Chad

[PEARL DRUMS]

TBIII is weather proof.

[Black Mockingbird]

Round all your edges cus it helps prevents splinters from lifting at the edges,and titebondIII will work fine with a sinew wrap.

[Pat B]

Either glue will work with sinew. I think for this application I would use hide glue. The sinew/hide glue combo are very compatable and the whole combo will shrink, binding the wrap very well. You can add a thin layer of TBIII over the sinew/hide glue for a sealer before you add your bow finish but that isn't necessary.

[Chad Orde]

Thanks for the feedback guys!