« previous next »
Pages: [1]   Go Down

Author Topic: BBO  (Read 396 times)

Offline pipedream

  • Trad Bowhunter
  • **
  • Posts: 23
BBO
« on: February 27, 2013, 09:36:00 AM »
I just finished a BBO longbow. 64" NTN,50# with slightly flipped tips and  my question is this. The boo was 1/8" thick at the thickest and the osage has coome out at about 1/2" - 3/8" thick. Am I in trouble? Is the osage too thin?
Logged
Pipedream

Offline LittleBen

  • Trad Bowhunter
  • **
  • Posts: 2970
Re: BBO
« Reply #1 on: February 27, 2013, 09:52:00 AM »
I think you're fine. I assume we're talking 28" draw?

64" osage bow is not pushing the boundaries of the material at 50# I dont think. You should be fine.

As with any wood bow, check the bow frequently and carefully especially at the beginning.
Logged

Offline David Flanrey

  • Trad Bowhunter
  • **
  • Posts: 960
Re: BBO
« Reply #2 on: February 27, 2013, 09:59:00 AM »
Pipedream,
Don't tease us with post like this.  Pics man Pics.  Let's have them.  We want to see it.  :bigsmyl:
Logged

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20690
Re: BBO
« Reply #3 on: February 27, 2013, 10:44:00 AM »
BBO specs are perfect.
Logged

Offline pipedream

  • Trad Bowhunter
  • **
  • Posts: 23
Re: BBO
« Reply #4 on: March 04, 2013, 08:34:00 AM »
Well I have put about 200 arroes thru it and so far so good. I haven't pulled it past about 24" as I shoot it in but it is sending a arrow with force.
Logged
Pipedream

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: BBO
« Reply #5 on: March 05, 2013, 10:19:00 AM »
Don't worry about the thickness if the bow is bending well and at the draw weight you are aiming for.
Logged
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©