Author Topic: Black Locust?  (Read 500 times)

Offline Valkyrie

  • Trad Bowhunter
  • **
  • Posts: 103
Black Locust?
« on: October 31, 2013, 08:30:00 PM »
Never built a bow but the idea sounds really cool.  I'm handy and mechanically inclined and happen to own hundreds of black locust trees across my property, along with a ton of hickory too.  I found many with very straight and seemingly twist free trunks..

We cut a few cords every year as it makes great firewood.

What do I need to know/do to get some nice bow staves?

Offline KellyG

  • Trad Bowhunter
  • **
  • Posts: 4254
Re: Black Locust?
« Reply #1 on: October 31, 2013, 09:39:00 PM »
Seal the ends with, wood glue, Paint, shellac or something similar when you cut it. Take the bark off as soon as you can and seal the back.

Split them to help them dry faster. I am not sure if you should cut Black locust in the winter or spring. Hickory is cut in the spring as it begins to bud so the bark peels off.

Others will chime in I am sure.

Offline red hill

  • Trad Bowhunter
  • **
  • Posts: 2025
Re: Black Locust?
« Reply #2 on: October 31, 2013, 10:34:00 PM »
Kelly's right. I seal with spray shellac. It's quick and no where near as messy as glue.

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Black Locust?
« Reply #3 on: October 31, 2013, 11:05:00 PM »
Cut it and split the log in half, seal the ends and put it in the dry for a few weeks then reduce it to staves. Remove the bark and sapwood and seal the back. You can reduce the staves to floor tiller stage for faster drying.
 I build locust bow to whitewood dimensions because of its tendency to fret. Locust accepts heat treating very well.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©