Author Topic: figured purple heart, what to do with it? (Read 987 times)

DelawareDave · « **on:** November 03, 2013, 08:00:00 PM »

So I have two beautiful figured purple heart boards that are 42"x6"x almost an 1" thick, what would u do with them? And before Sam chimes in im not using them for fire wood

Roy from Pa · « **Reply #1 on:** November 03, 2013, 08:30:00 PM »

Send them to Roy from Pa:)

DelawareDave · « **Reply #2 on:** November 03, 2013, 08:38:00 PM »

Well roy I guess thats better then fire wood...

red hill · « **Reply #3 on:** November 03, 2013, 08:41:00 PM »

Send them to Roy with stipulations! Also a piece of bamboo!

kennym · « **Reply #4 on:** November 03, 2013, 09:02:00 PM »

I'm with Sam!! :D

2nd thought, send em to Roy, he needs that!!

takefive · « **Reply #5 on:** November 04, 2013, 02:11:00 AM »

I agree, send them to Roy! Those would make some really pretty lams for that glass bow he's always wanted to build.

Roy from Pa · « **Reply #6 on:** November 04, 2013, 05:46:00 AM »

Glass? What is glass? LOL

LeeNY · « **Reply #7 on:** November 05, 2013, 01:54:00 AM »

Hang on, isn't sending wood to Roy almost like! Oh never mind you get where I'm going with this. :D

:D

KellyG · « **Reply #8 on:** November 05, 2013, 07:53:00 AM »

How about post pics so we all my see what you are working with.

Sam Harper · « **Reply #9 on:** November 05, 2013, 08:47:00 AM »

You should.....
But I....
Ugh!

LittleBen · « **Reply #10 on:** November 05, 2013, 01:07:00 PM »

Sam I think a link to the discussion of purpleheart on your site would also get the point across.

Sam Harper · « **Reply #11 on:** November 05, 2013, 05:59:00 PM »

I agree.

http://poorfolkbows.com/purpleheart.htm

DelawareDave · « **Reply #12 on:** November 05, 2013, 06:11:00 PM »

Ill post some pics tomorrow when I get up the shop

DelawareDave · « **Reply #13 on:** November 10, 2013, 09:29:00 AM »

Sorry the pics took so long, there not the best but gives u an idea of what I'm working with.

Bowjunkie · « **Reply #14 on:** November 10, 2013, 06:58:00 PM »

It turns so dark under clear glass, I doubt you'd see much of that figure after a short while.

wood carver 2 · « **Reply #15 on:** November 10, 2013, 07:39:00 PM »

It looks good in risers. I happen to like purpleheart.

Dave.

Trux Turning · « **Reply #16 on:** November 10, 2013, 07:50:00 PM »

I agree- it does look good as a riser... But not one of my favorites to work with.

DelawareDave · « **Reply #17 on:** November 10, 2013, 10:06:00 PM »

I'm still not sure what possessed me to buy these.. I built a speargun out of purple heart and red heart a few years ago and buy the time I was done with it I swore I would not work with it again.... I guess a few years has helped me forget how much of a pain in the butt it is to cut and sand....

talkingcabbage · « **Reply #18 on:** November 11, 2013, 02:45:00 AM »

You could send it all to me and I'll get rid of it for you

No use you spending all the time and hassle on it. You can thank me later :p

NYArrow · « **Reply #19 on:** November 11, 2013, 07:32:00 AM »

Risers! You have many risers that can be glued up with that would. Or cut the stuff up into riser block and sale it. You could likely double you $ invested.

Or send it to roy!

News:

Author Topic: figured purple heart, what to do with it? (Read 987 times)

Users currently browsing this topic: