« previous next »
Pages: [1]   Go Down

Author Topic: ....reduce draw weight...  (Read 496 times)

Offline cocie

  • Trad Bowhunter
  • **
  • Posts: 27
....reduce draw weight...
« on: November 23, 2013, 12:05:00 PM »
Hi.. I'm stuck on how to reduce bow weight on one piece recurve ( Binghams alternate riser)design.    :knothead:  
 Now it is around 60# at 18"...  way to stong...  riser is 24" long... and 22" limbs... I don't want to make limbs more narrow than they are now...  what do you suggest? is there any other way?  sanding limbs ( fiberglass )?  

thx      :notworthy:
Logged

Offline macbow

  • Trad Bowhunter
  • **
  • Posts: 2870
Re: ....reduce draw weight...
« Reply #1 on: November 23, 2013, 01:16:00 PM »
Sanding the glass will work but it is a slow process.
You'll want to keep track of sanding strokes to keep it even.
Logged
United Bowhunters of Mo
Comptons
PBS
NRA
VET
"A man shares his Buffalo". Ed Pitchkites

Offline cocie

  • Trad Bowhunter
  • **
  • Posts: 27
Re: ....reduce draw weight...
« Reply #2 on: November 23, 2013, 02:55:00 PM »
Yes.. it will be very long process...  but last think that I want to do is sanding fglass... I found that trapping the back of bow will reduce weight... I'll try that..  thx
Logged

Offline macbow

  • Trad Bowhunter
  • **
  • Posts: 2870
Re: ....reduce draw weight...
« Reply #3 on: November 23, 2013, 07:38:00 PM »
It sounds like you need a lot removed. I know you don't want to reduce the width but just trapping on a recurve may not do it.
Logged
United Bowhunters of Mo
Comptons
PBS
NRA
VET
"A man shares his Buffalo". Ed Pitchkites

Offline LittleBen

  • Trad Bowhunter
  • **
  • Posts: 2970
Re: ....reduce draw weight...
« Reply #4 on: November 23, 2013, 08:01:00 PM »
60# @18" is probably going to end up 100# @28" ....
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©