sooooo....any ideas?

[soy]

Not on this one

[Crooked Stic]

Someone asked if the acetone was dry-In my opinion if you use acetone to clean your wood parts you are taking a big chance of contamination to start with.

[soy]

I only did on the glass.... and to correct myself I used denatured alcohol , and it had dried

[kennym]

I've never had a prob with walnut or aboo, but had some jatobe limbs that had the same marks under clear on both limbs, looked like cracks working in from edges. Just white marks, figured since they matched on both, it was the jatoba. Maybe just that pc but never put it in a limb again.

[Roy from Pa]

Every time I think about trying to make a glass bow and I read these type threads. I just stick with all wood bows..  

[heartlandbowyer]

Stuff happens and it sucks when it does but if your gonna build em your gonna break em. My only de-lamination happened before I built myself an oven. I had plenty of bows before that cure at room temp but that was the only one that failed. I made an atlatl out of the other limb that didn't de-laminate.

I typically just use a stiff brush to clean my lams and maybe blow them off with a little air if they are really dusty. I run my press with 70-75 psi and use plenty of smooth on, it's cheep compared to glass and lams.

Cory

[jsweka]

Originally posted by Roy from Pa:
Every time I think about trying to make a glass bow and I read these type threads. I just stick with all wood bows..    

LOL - That sounds like something I said recently about a wood bow breakage thread.

[Roy from Pa]

Yes Johnny..  

[Black Mockingbird]

I don't know? BUT... Thad I wood take it as an omen that glass is evil,and the wood bow gods are telling you to come back            

[Roy from Pa]

X's 2 BM bird..  

[bigbob2]

           

[soy]

maybe you're right Mr mockingbird