« previous next »
Pages: [1]   Go Down

Author Topic: KenneyM design change  (Read 317 times)

Offline rockkiller

  • Trad Bowhunter
  • **
  • Posts: 434
KenneyM design change
« on: May 17, 2014, 12:24:00 PM »
Can anyone tell me a ballpark figure on how many lbs will drop from changing from 1 1/2 at the fades to 1 1/4??Total stack is .325 and is 60" ntn.With 1 1/2" wide at the fades its supposed to come out to about 50#.
   I guess I could just try it and see what happens,but was just curious    :dunno:  

  Thanks for any information.  
   Al
Logged

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20689
Re: KenneyM design change
« Reply #1 on: May 17, 2014, 04:51:00 PM »
8 - 10#....
Logged

Offline grizz

  • Trad Bowhunter
  • **
  • Posts: 146
Re: KenneyM design change
« Reply #2 on: May 17, 2014, 08:21:00 PM »
Rock, your total stack looks a little high for 50# to me. I agree with Roy, 8-10# reduction on the width.
Logged
mike

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17340
Re: KenneyM design change
« Reply #3 on: May 18, 2014, 12:05:00 PM »
Al, those usually make weight at 1 3/8, depending on the individual bowyer. You will probably need about 4-5 # added to go down to 1.25"

Again depending on exactly how you do things.

Keep good notes on each one and you will get dialed in!
Logged
Stay sharp, Kenny.

   https://www.kennysarchery.com/
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©