Author Topic: Help with limb timing  (Read 671 times)

Offline Crittergetter

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 2634
Help with limb timing
« on: July 06, 2014, 09:14:00 PM »
Ok, finally got a few minutes to work on my second glass bow. Started tillering today and as it sits now it's about 3/16 positive tiller and limbs look pretty even on the tree. It still tracks a little to the strong limb. Here's where I threw myself for a loop! I flipped it over on the tree and pulled from the same position as before. This time it tracks almost dead straight, just slightly to the strong limb! Soooo, should I just make the bow this way or keep tillering as I started? I would be putting the strong limb up. Don't really matter to me. I just want a smooth bow with as little hand shock as possible!
An elitist mentality creates discord, even among the elite!
"I went jackalope hunting but all I saw was does!"
Luck is when preparedness meets opportunity, I just need more opportunities!

Offline macbow

  • Trad Bowhunter
  • **
  • Posts: 2870
Re: Help with limb timing
« Reply #1 on: July 06, 2014, 10:08:00 PM »
If you shoot split finger I'd tiller a little more till it was a little closer to 1/8 positive.
United Bowhunters of Mo
Comptons
PBS
NRA
VET
"A man shares his Buffalo". Ed Pitchkites

Offline Ice Mike

  • Trad Bowhunter
  • **
  • Posts: 156
Re: Help with limb timing
« Reply #2 on: July 06, 2014, 10:49:00 PM »
I'd put the strong limb on top and call it good. You're not going to have a notable difference in hand shock if you keep going unless you go all the way to perfect tiller at brace. You can always go ahead and shape the grip area, cut a shelf if desired, and shoot a few arrows to see how you like it. If you think it needs more after that, go for it, but you may be happy with it right where it is.

Offline Bowjunkie

  • Trad Bowhunter
  • **
  • Posts: 2324
Re: Help with limb timing
« Reply #3 on: July 07, 2014, 08:46:00 AM »
You didn't mention whether the bow was of symmetrical design or if the top limb was longer. You also didn't mention whether you were pulling from center of handle or pulling from where your string hand will be pulling when you're actually shooting it.

If the latter, I would tiller the bow so that the nock point comes straight back, not favoring either limb. That will produce the nicest drawing, most forgiving, inherently tuned bow, with the least handshock. If it ends up with negative tiller, so be it... that's exactly what it needs.

Offline Crittergetter

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 2634
Re: Help with limb timing
« Reply #4 on: July 07, 2014, 09:55:00 AM »
Sorry for the lack of info guys. The bow is symmetrical , the shelf will be 1 1/4" above center and I am tillering for split finger.  My goal is to do exactly what  bowjunkie described with the knocking point tracking straight on the draw and release. I've just never tillered a bow this way before and was unsure how to proceed. Thx for the help!
An elitist mentality creates discord, even among the elite!
"I went jackalope hunting but all I saw was does!"
Luck is when preparedness meets opportunity, I just need more opportunities!

Offline Wolftrail

  • Trad Bowhunter
  • **
  • Posts: 1152
Re: Help with limb timing
« Reply #5 on: July 07, 2014, 11:46:00 AM »
The big thing I found is to keep those tips light that will lessen the shock if anything.

Offline bigbob2

  • Trad Bowhunter
  • **
  • Posts: 2160
Re: Help with limb timing
« Reply #6 on: July 07, 2014, 06:28:00 PM »
"The big thing is to keep those tips light that will lessen the shock if anything" X2

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©