Drum Sander

[rmorris]

What grit are you all using on your drum sanders for veneers and lamination? I just picked up a Grizzly baby drum sander and now I need to order some sand paper for it...

[mikkekeswick]

80 grit to prepare for glue-up.

[Roy from Pa]

I use 60 grit, some use 36 grit. I've heard that 36 grit sometimes leaves marks that may be noticeable under clear glass.

[Bowjunkie]

40 grit.

[BigJim]

I used to use 40g because it was a bit cheaper with the same results as the 36g.

However, I have an oscillating wide belt sander and on occasion, I could see the wavy lines through the clear glass.

I have switched to 60g for everything unless I plan on staining the veneers. Glass has an 80g finish.

I prefer the 60 to anything smoother because it is less likely to burn the wood and since I have never noticed any sanding marks, it works well for me.

Bigjim

[rmorris]

Thanks everyone! I will get on it and hopefully make a second bow this year.

[Roy from Pa]

40# at 27.5" draw, RH'ed. LOL

[Trux Turning]

Ralph-60 grit for me- I get mine at super grit by the roll and cut my own.

[rmorris]

Hey Ole Roy ,do I really need to make your wife a bow? Aren't ya retired?

[Roy from Pa]

Nuff outta you son..