What's the fix?

[monkeyball]

I have a '64 Bear Kodiak Special that is in real nice condition. It has one very small scratch on the back of the upper limb. I have strung it and have drawn it many times with no issue, but it is there and it bothers me.

 I have heard a lot about the Loctite 420 and the fact that it is not the easiest compound to find found me purchasing a tube of JB Weld in the Plastic Weld. I have not used it yet, just thought I would get some of your opinions on what you think. Thanks.

 

[monkeyball]

Anybody???????

[Roy from Pa]

I would use a super thin super glue on it.

[fujimo]

x2 what the ol fella sez!

[Robertfishes]

I'm looking at pic on my cell phone so I can't see it very well.is that a scratch or a crack on limb edge?

[Trux Turning]

I'm having the same problem with the picture- either way thin super glue is the way to go.

[monkeyball]

A heavy scratch or a small sliver. You can feel it with your fingernail.

[Roy from Pa]

See if you can lift up an edge with a toothpick. If not then it's a scratch, so just hit it with very thin super glue. If it does lift up, don't lift too far, hold it up and put very thin super glue under the whole sliver then clamp it down snug. Let it alone for a day.

[monkeyball]

Thanks Roy. There is nothing to lift, it is like a small void. I will fill it with the Super Glue like you said and leave it harden. Thanks,
                                                                                       Craig

[last arrow]

Note, that around me to get the thin loctite (wicking grade), you have to go to an industrial supply house like Grainger. But they will be able to have it for you tomorrow for about $5

[jhk1]

As recommended by others above, use thin (watery) superglue-- not the regular superglue.  Last year I got a small bottle of Loctite 420 off the big auction site; I think it ran me a little over $15 with shipping.  

I believe Woodcraft stores (or go to their website) still carry "Hot Stuff" CA (cyanoacrylate-- it's super glue) glue.  It's woodworker-quality CA glue.  The "Hot Stuff" comes in 2 or 3 different viscosities-- get the thinnest one.  When I bought a bottle a couple of years ago at Woodcraft, I think it cost me $10-- but it was a good-sized bottle (2 or 4 oz., I forget which).

You want thin, watery CA glue like Loctite 420 or Hot Stuff, because you want it to wick all the way into the crack.  Regular superglue won't penetrate deep into the crack like the thinner CA glue.

That '64 KS sounds too nice not to spend the $10-$15 bucks on the right glue.  Good luck on getting her fixed up.

[fujimo]

try the model aeroplane shops- they will have all three viscosities of ca glue

[JamesV]

I bought a bottle of 420, $17 delivered, to repair a riser and I was not impressed at all. The regular CA I get a wally world works just as well and you get 4 tubes for $1.57