magnus snuffer broadheads

[Arrowcraft]

does any one have a way to get snuffer heads razor shaving sharp ? Bought 4 different dmt diamond stones, leather strop with aluminum oxide compound. i got them sharp but not shaving sharp any ideas?

[LittleBen]

Sniffer are hollow ground and the blades are not straight when they come out of the package.

I start fy flattening each side on a belt sander carefully wil maybe 220grit or 320 grit. Then once they're flat I go to sharpening stones, progressively finer.

If you don't flatten them and you try to sharpen them on a flat stone, only the tip and the back end of the blades contact the stone. The middle of each blade is above the stone surface and isn't getting sharpened.

[kennym]

Once you get em flat front to back like Ben says, black the edges with a sharpie, and use a 6" fine wheel grinder( head on an arrow please) to hollow grind 2 blades at a time til the marker is gone. Then REALLY lite strokes on 2 blades at a time with a fine file.

Shave in about 1.5 minutes.

That is the Rothaar way as told to me by Ryan R.

Good luck!