« previous next »
Pages: [1]   Go Down

Author Topic: Red Oak board  (Read 633 times)

Offline 1oldbowguy

  • Trad Bowhunter
  • **
  • Posts: 614
Red Oak board
« on: December 17, 2015, 08:10:00 PM »
I have gotten a nice piece of Red Oak board.  It is 8’ long and 1 ½” wide and ¾” thick with very nice grain orientation.  My question is this.  Can I make an English style long bow out of this board?  I was looking at something around 72” or so.  If so any thought on the layout of the bow.  Been away for a while and wish to get started back in the Traditional bow world.  Thanks for any help.       ;)
Logged
Always say what you mean, that way people will know you mean what you say.

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Red Oak board
« Reply #1 on: December 17, 2015, 11:22:00 PM »
Red oak would not be a good candidate for an ELB. It has weak compression and will likely take set and maybe fret with a rounded belly. You could build an Eastern Woodland style bow. It has a rectangular cross section and bends through the handle.
Logged
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline mikkekeswick

  • Trad Bowhunter
  • **
  • Posts: 988
Re: Red Oak board
« Reply #2 on: December 18, 2015, 03:27:00 AM »
No just as Pat said - it just won't handle the design. Flat belly will be fine though.
Logged

Offline 1oldbowguy

  • Trad Bowhunter
  • **
  • Posts: 614
Re: Red Oak board
« Reply #3 on: December 18, 2015, 08:13:00 AM »
Thanks for the info, flat bow it is.   ;)
Logged
Always say what you mean, that way people will know you mean what you say.

Offline George Tsoukalas

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2922
Re: Red Oak board
« Reply #4 on: December 18, 2015, 09:08:00 AM »
There's info on my site including a buildalong for a bend in the handle bow with no glued on handle.
If you change  the width to 1 3/8" the potential  is there for  45-50# provided you tiller well.
Jawge
 http://traditionalarchery101.com/
Logged

Offline 1oldbowguy

  • Trad Bowhunter
  • **
  • Posts: 614
Re: Red Oak board
« Reply #5 on: December 18, 2015, 01:02:00 PM »
Thanks George, just went to your site and have marked it.  I think I will try both as I have gotten another board.  Again, thanks to all for your help.
Logged
Always say what you mean, that way people will know you mean what you say.
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©