Author Topic: Kennym 62"??  (Read 637 times)

Offline breazyears

  • Trad Bowhunter
  • **
  • Posts: 337
Kennym 62"??
« on: August 15, 2016, 08:26:00 AM »
I dont have a .001, or a .003 taper sled. I do have a .002. Would it be better to go with .002 or .004 taper rate with his 62" form?
theirs a fly in my soup

Offline monterey

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 4248
Re: Kennym 62"??
« Reply #1 on: August 15, 2016, 10:38:00 AM »
I think it might be a good idea to just get a taper sled or purchase the lams.  The wrong taper could result in a wasted build.  OTOH, Kenny may have already been down that road and can tell you what to expect.
Monterey

"I didn't say all that stuff". - Confucius........and Yogi Berra

Offline breazyears

  • Trad Bowhunter
  • **
  • Posts: 337
Re: Kennym 62"??
« Reply #2 on: August 15, 2016, 01:39:00 PM »
I made a .003" sled!
Thanks.
theirs a fly in my soup

Offline Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6075
Re: Kennym 62"??
« Reply #3 on: August 15, 2016, 04:09:00 PM »
>004 with a tip wedge would work. Have to add a little bit to your stack.
High on Archery.

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: Kennym 62"??
« Reply #4 on: August 15, 2016, 07:28:00 PM »
I like .003 best, glad you got a .003!

Now you can make a .001 by stacking the .002 and .003 properly!  :D
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline talkingcabbage

  • Trad Bowhunter
  • **
  • Posts: 791
Re: Kennym 62"??
« Reply #5 on: August 18, 2016, 01:56:00 AM »
Not to hijack a thread, but how does one go about getting plans for a Kenny M 62" bow????
Joe

"If your work speaks for itself, don't interrupt."

One of two things will happen; it'll either work or it won't.

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©