Matching Tbird satin to flat on a repair

[Jerry Gille]

I repaired a small 1 1/2" spot on a longbow for a buddy of mine. I originally built the bow and shot tbird flat on it. I chose not to strip the entire bow and just spot fixed it. Problem is that I only currently have satin tbird on hand. Any ideas to help match it up? I know it won't be perfect but I'd love to get it halfway close for him.

[Holm-Made]

Spray the spot with Satin and see if it is close enough.  If not then hit the whole bow with a coat.   Maybe just a misting texture coat will do it..

[Bow man]

Originally posted by Holm-Made:
Spray the spot with Satin and see if it is close enough.  If not then hit the whole bow with a coat.   Maybe just a misting texture coat will do it..

Yes.   Hold gun a little further away than normal and do a light mist over the whole bow after spot is repaired

[Jerry Gille]

Thanks for the advice here guys.  I appreciate it!

[Jerry Gille]

I did as suggested here and it worked out nicely. Thanks for the advise gentlemen.

[Bow man]

So Glad it worked!!