Best way to remove clicker adhesive from limb?

[jvs9932]

Hi guys,

So I guess it's a sign that I've been shooting a lot of arrows when the adhesive backing on my clicker has degraded so much that the entire unit pulls off the limb. I have a replacement clicker to install but what do you guys recommend as the safest way to remove the residual double-stick foam adhesive from the fiberglass on the limb so the new adhesive has a clean surface to adhere to?

Thanks!

[rainman]

WD 40

[jvs9932]

Thanks!

[jhinaz]

Dental floss. Start it under the adhesive and then work it back and forth in a sawing motion. This also works good for removing limb savers. - John

[RedRidge]

I have had good luck just getting a lip or edge then start pushing or rolling it back with my thumb evenly across until its off, if that makes any sense.

[jrstegner]

Olive oil works better than anything for removing any kind of residue from stickers. No joke.

[katman]

Good suggestions above, remember to degrease with denatured alcohol or acetone for good adhesion.

[SCATTERSHOT]

GooGone or GoofOff works very well. It leaves a residue, though, so you’ll have to wipe that off with alcohol or something.

[jvs9932]

Thanks for all the great suggestions, fellas!