3 rivers longbow riser blanks

[Hoosierarcher88]

has anybody used one of these blanks for a bow build and if so what style longbow did you make? Ive thought about making a hill style bow but i dont have the tools to cut and sand fadeouts

[Pat B]

I think you'll still have to do the fine sanding to get the fades feathered out correctly.

[Hoosierarcher88]

I figured there would need to be some fitting and sanding to get everything perfect. Do you think this would be possible with hand tools such as a sanding block

[monterey]

If you absitively posilutely can't cut and sand one yourself it's a good way to go.  One way to feather them out is to lay it on a flat smooth surface back down and feather with 60 grit sandpaper glued to a flexible backing about six or eight inches long.  Take your time and check your work.

You could also enquire with a supplier like Kenny and see if he might do it for you.  Advantage being that you could select other lengths, etc.

That kind of riser is perfect for a hill style.  You can make it flat, reflexed or string follow just depends on how you design the form.

[kennym]

Yup, I'll do it. And probably cheaper!

[TradBowyer]

I've used these in the past and they come ready to glue. I never had to touch them up at all.

[Roy from Pa]

You will not find any better quality of work and materials than from Kennym.