3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Brushing in a ladder stand  (Read 1845 times)

Offline CRM_95

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 776
Brushing in a ladder stand
« on: July 21, 2018, 07:39:44 PM »
So I found a spot where I really wanted to hang a stand, and there was a good tree, but cover was minimal. I was talking to a couple buddies and they suggested adding brush to the stand to break it up. I know it’s simple, I’d just never done it even through I add brush to pop up blinds all the time. I got hot and tired yesterday so I’m not completely done, but was impressed with how it turned out in the relatively short amount of time I spent on it. I zip tied brush and limbs to the ladder, then tied a rope around the trunk above the seat and stuck some more brush through it. I’m going back in a couple weeks to add a little more, and as it starts to die off and turn brown I’ll freshen it up as needed.
Before

After



Sent from my iPhone using Tapatalk

Offline CRM_95

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 776
Re: Brushing in a ladder stand
« Reply #1 on: July 21, 2018, 07:41:47 PM »
Actually this was right before I left. The second pic was before I added the brush to the trunk.



Sent from my iPhone using Tapatalk

Online Bowguy67

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 1311
Re: Brushing in a ladder stand
« Reply #2 on: July 21, 2018, 07:47:44 PM »
The top to me looks exactly the same. Maybe you didn’t get to it yet? Truth is the ladder part needs zero brush on it. Actually none of it does especially if it’s sitting out there. All I’d do I’d i was you was zip tie a couple cedar ,or something like that, branches to the arm rests and be done. Who cares if it’s brown as long as it doesn’t dry noisy.
It’s only to break up your outline. Continually adding stuff adds your scent onto new parts. Just not necessary
62” Robertson Primal Overdrive 57lbs
62” Robertson Primal Overdrive 52lbs
62” Robertson Primal Overdrive 53lbs
62” Robertson Fatal Styx 47lbs
64” Toelke Whip 52lbs
58” Black Widow PSA 64lbs
62” Black Widow PSA 54lbs
60” Bighorn Grand Slam 60lbs
60” Bear Kodiak Hunter 50lbs painted black. My uncles bow. He may be gone but his spirit isn’t. Bow will hunt again
52” Bear Kodiak Magnum 50lbs

Offline CRM_95

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 776
Re: Brushing in a ladder stand
« Reply #3 on: July 21, 2018, 08:16:36 PM »
I don't know..it's only about 12' high. Deer notice ladder stands where I hunt. If it isn't in some cover, they'll look up every time, especially when they're low.

Offline Lakerat007

  • Trad Bowhunter
  • **
  • Posts: 126
Re: Brushing in a ladder stand
« Reply #4 on: July 21, 2018, 09:49:00 PM »
I normally use fence staples with cedar limbs when legal. If not I lash them with wire or twine. I normally have stand set up expecting movement right to left and a shot being  off my left side so I add brush to the right and add much needed shade over head. I prefer cedar or something that holds its leafs and not just be a few twigs of cover come prime time.
The early bird might get the worm, but the second mouse gets the cheese!

Online BAK

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 1774
Re: Brushing in a ladder stand
« Reply #5 on: July 21, 2018, 11:06:38 PM »
I use cedar limbs every fall.  I don't use them after they turn brown as they are like sitting in a nest of cactus then.
"May your blood trails be short and your drags all down hill."

Online rastaman

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 7825
Re: Brushing in a ladder stand
« Reply #6 on: July 22, 2018, 10:46:35 AM »
Or you can use artificial Christmas tree limbs or garland zip tied to your stand.  Then you wouldn't need to redo it every year. Good luck to you this season...
TGMM Family of the Bow

                                                   :archer:                                               

Randy Keene
"Life is precious and so are you."  Marley Keene

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17318
Re: Brushing in a ladder stand
« Reply #7 on: July 22, 2018, 11:46:57 AM »
We use pin oak branches, they won't lose leaves if you cut them green.  This is on private land, public won't allow cutting most places.

The pin oaks grow branches very low so field edges are helped by trimming.

We put them on nearly every stand. Works great to have more than a wriggling lump up there! :)
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline Roadkill

  • Trad Bowhunter
  • **
  • Posts: 2674
Re: Brushing in a ladder stand
« Reply #8 on: July 22, 2018, 11:14:49 PM »
Yep garland and artificial trees make a great way to hide a stand  .
Cast a long shadow-you may provide shade to someone who needs it.  Semper Fi

Users currently browsing this topic:

0 Members and 3 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©