3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Most buoyant arrow material?  (Read 2100 times)

Online Gdpolk

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 2394
    • Polk Knives
Most buoyant arrow material?
« on: January 29, 2019, 02:48:24 PM »
I’m wanting to build arrows that can float and be retrieved by canoe from a lake. Naturally wood comes to mind but I could also use a carbon shaft and seal the ends to have a hollow tube that should float as well. Has anyone experimented with different types of arrow builds and found one to have superior buoyancy?
1pc and 2pc Sarrels Sierra Mountain Longbows - both 53.5lbs @ 29"

https://www.gpolkknives.com/

Online Hermon

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2127
Re: Most buoyant arrow material?
« Reply #1 on: January 29, 2019, 03:02:58 PM »
I think wood and aluminum are your best bets.  Don't recall many, if any, carbons that float. 

Offline Mark R

  • Trad Bowhunter
  • **
  • Posts: 503
Re: Most buoyant arrow material?
« Reply #2 on: January 29, 2019, 03:12:40 PM »
I think they all float if not extreme point weight, at least all mine do, be it wood or carbon. They are hollow.

arrow30

  • Guest
Re: Most buoyant arrow material?
« Reply #3 on: January 29, 2019, 03:17:45 PM »
the carbons I have shot into water floated with the knock at the surface, it depends on the weight of the point your shooting weather it stays up on the surface or goes to the bottom. the ones I shot had 300 grns up front, 100 grn insert, 200 grn blunt. the water was shallow enough that I didn't have to dive for them.

Online MCNSC

  • Trad Bowhunter
  • **
  • Posts: 1333
Re: Most buoyant arrow material?
« Reply #4 on: January 29, 2019, 04:27:43 PM »
Aluminum will float, guess it does depend on point weight though and perhaps shaft diameter. Used to be a local 3D shoot that had a long distance shoot across a lake. Back then every body shot aluminum shafts. They would go out in a boat and pick up the floating shafts.
"What was big was not the trout, but the chance. What was full was not my creel, but my memory"
 Aldo Leopold

"It hasn't worked right since I fixed it" My friend Ken talking about his lawn mower

Offline OkKeith

  • Trad Bowhunter
  • **
  • Posts: 1237
Re: Most buoyant arrow material?
« Reply #5 on: January 29, 2019, 04:40:51 PM »
With carbon and alum... depends on whether the insert and nock ends are sealed. Some inserts have a threaded hole at the back to add threaded weights. The nocks on all my carbons are just friction fit.

OkKeith
In a moment of decision the best thing you can do is the right thing. The worst thing you can do is nothing.
Theodore Roosevelt

Offline reddogge

  • Trad Bowhunter
  • **
  • Posts: 4926
Re: Most buoyant arrow material?
« Reply #6 on: January 29, 2019, 06:36:39 PM »
They all float.....point down. I haven't seen an arrow yet with a heavy enough point to sink one to the bottom. The nock end never comes near the water so doesn't have to be sealed as long as your point insert is tight
« Last Edit: January 29, 2019, 06:41:49 PM by reddogge »
Traditional Bowhunters of Maryland
Heart of Maryland Bowhunters
NRA
Mayberry Archers

Offline jbpharmd

  • Trad Bowhunter
  • **
  • Posts: 129
Re: Most buoyant arrow material?
« Reply #7 on: January 29, 2019, 07:29:05 PM »
Just curious, what are you trying to do? Ducks? Squirrels from trees overhanging creek?


Sent from my iPhone using Tapatalk

Offline Hummer3T

  • Trad Bowhunter
  • **
  • Posts: 1385
Re: Most buoyant arrow material?
« Reply #8 on: January 29, 2019, 07:53:17 PM »
Fill carbon with round foam that is used for screen door...perfect size.
Life is about learning from your mistakes!

Chek-mate hunter I 62" riser with 60" limbs 49&42lbs@28

Samick Sage 62" 50lbs@28

Big Jim Mountain Monarch Recurve  60 inch / 50 lbs @ 28

Online Gdpolk

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 2394
    • Polk Knives
Re: Most buoyant arrow material?
« Reply #9 on: January 29, 2019, 10:02:05 PM »
Just curious, what are you trying to do? Ducks? Squirrels from trees overhanging creek?


Sent from my iPhone using Tapatalk
  • waterfowl is on my list if I can find a place legal to use archery equipment with
  • small game on a couple of islands in a nearby lake where the arrows may skip into the water is my primary goal. I went on a canoe camp trip this past weekend and these islands are teeming with rabbit, squirrel, and dove...shotguns are legal here and I have a great 20, 16, and 12 of which all would be adequate but I like to bowhunt the most. My shotguns only come out for sentiment on occasional hunts because they came from my late grandfather.
  • just purely for fun I want to toss some styrofoam in shoot off a cliff at it a bit this summer then jump in and retrieve all my arrows as another way to “stump shoot”
1pc and 2pc Sarrels Sierra Mountain Longbows - both 53.5lbs @ 29"

https://www.gpolkknives.com/

Online M60gunner

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 3026
Re: Most buoyant arrow material?
« Reply #10 on: January 29, 2019, 11:20:02 PM »
Guess we shoot over the wrong pond. Waiting for the one at the range to dry up so I can retrieve my wife’s arrows from last 3D. No, they didn’t float, they sunk.

Offline Jon Stewart

  • Trad Bowhunter
  • **
  • Posts: 2567
Re: Most buoyant arrow material?
« Reply #11 on: January 29, 2019, 11:32:01 PM »
My thoughts would be old microflites or cedar shafts

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©