The layout is for a right hand carry, right handed archer. I've used this quiver quite a bit and it's taken some hard use with no issues. After a year or so I added the Asbel neck knife by making a sheath and attaching it with two stitch points. In a pinch, this quiver can be also be used as a back quiver. The leather needs to be on the stiff side, I think I used 8lb or 9lb. All stitching is synthetic sinew into pre-punched holes. The stitching on the curved side edge is just for looks ... you may also not want to cut in the curve initially as it may not be needed and it will make the layout and build easier. You can always add in the "access" curve later on, if it's really needed.
DON'T get hung up on the dimensions, just use them as a guideline and modify anything as need be.
[ You are not allowed to view attachments ]
[ You are not allowed to view attachments ]
[ You are not allowed to view attachments ]
[ You are not allowed to view attachments ]
[ You are not allowed to view attachments ]
[ You are not allowed to view attachments ]
[ You are not allowed to view attachments ]
Topic: Side Stalker Quiver (Read 3632 times)
