Author Topic: Question on mount holes in and old bow (Read 915 times)

Mich#1448 · « **on:** July 23, 2019, 10:21:01 PM »

I recently bought an older bear grizzly. The bow has 4 mount holes in the side of the riser, two are only about 1/4 inch deep but 2 are probably 1/2 inch. Do you think this will effect the power or the capabilities of the bow? I plan to do a repair on it using maple dowels I'm just curious on thoughts and opinions

Ray Lyon · « **Reply #1 on:** July 23, 2019, 10:28:24 PM »

Repair away and it will be solid.

Pine · « **Reply #2 on:** July 23, 2019, 11:23:59 PM »

2X ^^^^^

BAK · « **Reply #3 on:** July 24, 2019, 05:45:21 PM »

You shouldn't have any problem with the strength issue, though I wouldn't use dowels. Get a small chunk of wood of the same species as that riser, then use a 1/4 plug cutter and use the same grain direction. You can almost make them disappear.