« previous next »
Pages: 1 [2]   Go Down

Author Topic: Rit dye on lams  (Read 3685 times)

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: Rit dye on lams
« Reply #20 on: July 14, 2019, 07:12:51 PM »
Quote from: skeaterbait on July 14, 2019, 05:07:35 PM
I tried some black on curly maple and found out I need to sand it much finer grit. All I could really see where the sanding lines.

Yep, I can see some lines in pic, they are curved from the sander oscillaton…

Thanks,Cody!!
Logged
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline monterey

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 4248
Re: Rit dye on lams
« Reply #21 on: July 14, 2019, 08:36:50 PM »
That looks very good.
Logged
Monterey

"I didn't say all that stuff". - Confucius........and Yogi Berra

Online Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6075
Re: Rit dye on lams
« Reply #22 on: July 14, 2019, 09:46:14 PM »
Roy I think we been called english speaking. Maybe red neck to. :dunno: :bigsmyl:
Logged
High on Archery.

Offline Flem

  • Trad Bowhunter
  • **
  • Posts: 2985
  • "Don't quote me on that!"
Re: Rit dye on lams
« Reply #23 on: July 14, 2019, 10:02:45 PM »
Just wanted to let you guy's know that I speak smack too :wavey:
Logged

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: Rit dye on lams
« Reply #24 on: July 15, 2019, 04:25:59 AM »
Thought Ritz crackers were snacks, not smacks Flemmy?
Logged

Online Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6075
Re: Rit dye on lams
« Reply #25 on: July 15, 2019, 06:37:12 AM »

Logged
High on Archery.

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: Rit dye on lams
« Reply #26 on: July 15, 2019, 06:48:26 AM »
LOL
Logged

Offline Flem

  • Trad Bowhunter
  • **
  • Posts: 2985
  • "Don't quote me on that!"
Re: Rit dye on lams
« Reply #27 on: July 15, 2019, 08:07:24 AM »
Damn you guy's! Now I'm hungry :biglaugh:
Logged

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: Rit dye on lams
« Reply #28 on: July 19, 2019, 05:04:38 PM »
OK guys, I started a chisel in the end of  the test pc of stained maple and glass , and then peeled the glass right off with no maple sticking to glass and no glass stickin to the maple.  Am I using the wrong dye? It was mixed 3 parts d n alcohol to one part liquid dye...
Logged
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Rit dye on lams
« Reply #29 on: July 19, 2019, 07:24:09 PM »
Quote from: kennym on July 19, 2019, 05:04:38 PM
OK guys, I started a chisel in the end of  the test pc of stained maple and glass , and then peeled the glass right off with no maple sticking to glass and no glass stickin to the maple.  Am I using the wrong dye? It was mixed 3 parts d n alcohol to one part liquid dye...

Have you ever tried that on a glue joint before.
Logged
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: Rit dye on lams
« Reply #30 on: July 19, 2019, 07:50:35 PM »
I had a junk bow in shop and peeled glass on it. It tore filaments from glass all the way.
Logged
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Rit dye on lams
« Reply #31 on: July 19, 2019, 08:14:34 PM »
 :shaka:
Logged
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline Flem

  • Trad Bowhunter
  • **
  • Posts: 2985
  • "Don't quote me on that!"
Re: Rit dye on lams
« Reply #32 on: July 19, 2019, 09:32:03 PM »
Wish I had some insight for you Kenny. I wonder if Stic used the liquid or powder Ritz (sic) dye. Maybe the liquid has a carrier/solvent that hindered the bond? Just guessing, the MSDS for Rit gives no ingredients.
Logged

Online Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6075
Re: Rit dye on lams
« Reply #33 on: July 19, 2019, 11:11:42 PM »
I have used both liquid and powder. The blue green bow has probably has 1000 shots thru it. I really dont think the Rit is your problem. Not sure the chisel idea was a good test.  The all black one I just finished had liquid Rit. On spalted sycamore. That really soaked the glue and had air bubbles. Hence black. Probably 100 shots so far. Dunno

Sent from my LM-X410.F using Tapatalk

« Last Edit: July 20, 2019, 12:53:17 PM by Crooked Stic »
Logged
High on Archery.

Offline Forwardhandle

  • Trad Bowhunter
  • **
  • Posts: 1976
Re: Rit dye on lams
« Reply #34 on: July 20, 2019, 04:53:12 AM »
Interesting test I have been San bagging with interest I wish they made a dye you could add to EA-40 !  Then use it for the riser to !
Logged
If you fear failure, you will never try ! But never except it!!

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: Rit dye on lams
« Reply #35 on: July 20, 2019, 07:27:06 AM »
Will try to get some pics up of testing...
Logged
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Online Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6075
Re: Rit dye on lams
« Reply #36 on: July 20, 2019, 08:00:24 AM »
I think I would do another test with same wood no dye. And use the chisel the same way. Then make a decision.



Sent from my LM-X410.F using Tapatalk

Logged
High on Archery.
Pages: 1 [2]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©