Author Topic: 3 Piece Takedown Limb Help  (Read 886 times)

Offline Japes4

  • Trad Bowhunter
  • **
  • Posts: 52
3 Piece Takedown Limb Help
« on: August 05, 2019, 08:26:51 PM »
Hello all,

Attempting my first 3 piece takedown longbow. Everything was going great until tonight, when I had a brain fart and drilled the alignment pin hole on the wrong side of the limb  :banghead:. My question is, can I “fix” this by filling the hole with epoxy or an epoxy/plug combo and then re-drill on the correct side?  I’m hoping this will work and I dont have to start a new limb. Any help is appreciated.
"...there's more fun in hunting with the handicap of a bow than there is in hunting with the sureness of the gun."

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: 3 Piece Takedown Limb Help
« Reply #1 on: August 05, 2019, 09:19:28 PM »
Yep or just put an overlay on the face of limb...
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Online Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6075
Re: 3 Piece Takedown Limb Help
« Reply #2 on: August 05, 2019, 09:54:33 PM »
If it is in the right place just drill all the way thru. And overlay the front on both limbs.

Sent from my SM-T550 using Tapatalk

High on Archery.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©