« previous next »
Pages: [1]   Go Down

Author Topic: EA-40 and superglue  (Read 801 times)

Offline oldfartfarmer

  • Trad Bowhunter
  • **
  • Posts: 95
EA-40 and superglue
« on: September 23, 2019, 06:00:16 PM »
Im using the EVIL-Black Palm on my Riser,
on one part of it Im wanting to use the END-grain im thinking of soaking the lam side in superglue then sanding it for the EA-40 glue-up
asking if the EA-40 will adhere to the superglued Palm ?

Thanks
John

Logged
You only have so long a string,
 Try not to Burn it from Both Ends

Offline OkKeith

  • Trad Bowhunter
  • **
  • Posts: 1237
Re: EA-40 and superglue
« Reply #1 on: September 23, 2019, 07:23:56 PM »
I have used superglue on EA-40 but not the other way around.

Have you thought about resin stabilizing the Black Palm (might tame some of the evilness).

OkKeith
Logged
In a moment of decision the best thing you can do is the right thing. The worst thing you can do is nothing.
Theodore Roosevelt

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: EA-40 and superglue
« Reply #2 on: September 23, 2019, 08:29:26 PM »
I hear they have a smokin chemical reaction if they are put together while wet. 

Be careful of the end grain if you turn it in the riser where you need strength. Not sure I said that correctly but you know what I mean...
Logged
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Online Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6075
Re: EA-40 and superglue
« Reply #3 on: September 25, 2019, 10:09:08 AM »
You will be ok if you sand it. You want the end grain front to belly. Flat grain on the sides.
Logged
High on Archery.
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©