« previous next »
Pages: [1]   Go Down

Author Topic: Limb work help  (Read 1270 times)

Offline oldfartfarmer

  • Trad Bowhunter
  • **
  • Posts: 95
Limb work help
« on: October 31, 2019, 01:16:13 PM »
Ive got my Limbs off the form,
they have got goobers all along the sides,

best way to get them off?

Ive got a belt sander, My disk sander on the belt sander is NON-funtional
or
Hand sanding ?

thanks
John

Logged
You only have so long a string,
 Try not to Burn it from Both Ends

Offline Wolftrail

  • Trad Bowhunter
  • **
  • Posts: 1152
Re: Limb work help
« Reply #1 on: October 31, 2019, 01:38:56 PM »
Easy does it and use an old chisel.
Logged

Online Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6075
Re: Limb work help
« Reply #2 on: October 31, 2019, 03:25:23 PM »
If your belt part works use it. you can use a spindle but dont gouge them. Or the finer side of a hoof rasp. got to be careful not to splinter the glass.
Logged
High on Archery.

Offline oldfartfarmer

  • Trad Bowhunter
  • **
  • Posts: 95
Re: Limb work help
« Reply #3 on: October 31, 2019, 03:59:29 PM »
Took a Mini-Block plane to the sides, knocked off all the glue bumps, ill go with a flat Block-- hand sanding now
Logged
You only have so long a string,
 Try not to Burn it from Both Ends

Offline monterey

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 4248
Re: Limb work help
« Reply #4 on: October 31, 2019, 04:13:32 PM »
Hows that plane blade looking?  :)

I do mine on the belt set up on the Rigid.  Secret is to keep it moving and take your time.
Logged
Monterey

"I didn't say all that stuff". - Confucius........and Yogi Berra

Offline Flem

  • Trad Bowhunter
  • **
  • Posts: 2985
  • "Don't quote me on that!"
Re: Limb work help
« Reply #5 on: October 31, 2019, 04:18:49 PM »
Hand sanding :notworthy: Aren't you the intrepid one. Hope you are taking regular breaks to flog yourself, self abuse requires dedication :biglaugh:
Logged

Online Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6075
Re: Limb work help
« Reply #6 on: November 01, 2019, 01:35:29 PM »
I remember a guy named Hera several years back that did a whole TD with hand saw rasps and sand paper. Even hand rubbed the finish with a mix of petroleum jelly and super glue.

Logged
High on Archery.

Offline Flem

  • Trad Bowhunter
  • **
  • Posts: 2985
  • "Don't quote me on that!"
Re: Limb work help
« Reply #7 on: November 01, 2019, 03:17:30 PM »
He wasn't from New Mexico by chance?
Logged

Offline Forwardhandle

  • Trad Bowhunter
  • **
  • Posts: 1976
Re: Limb work help
« Reply #8 on: November 01, 2019, 03:51:22 PM »
I profiled one a while back using a cabinet makers rasp , file and jap saw including sight window worked good for the middle of the night not making noise and didnt take long but be careful work glass to wood like was said !
Logged
If you fear failure, you will never try ! But never except it!!
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©