3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Straight fletch  (Read 1560 times)

Offline txcookie

  • Trad Bowhunter
  • **
  • Posts: 251
Straight fletch
« on: January 15, 2020, 08:28:30 PM »
I bought a pile of feathers for some new arrows. I got left wing so its an issue. I do have straight clamps for my jojan. Anyone not use helical ?

Sent from my SM-G930V using Tapatalk

Is it deer season yet?

Offline Orion

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 8261
  • Contributing Member
Re: Straight fletch
« Reply #1 on: January 15, 2020, 08:34:25 PM »
You can set the clamp slightly offset to give the arrow greater spin.  Even if you fletch them perfectly straight, the curvature of the feather itself will impart some revolution to the arrow flight.  Straight or offset won't spin as much as more helical, but it usually works just fine. 

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Straight fletch
« Reply #2 on: January 15, 2020, 10:32:57 PM »
I've shot offset straight fletch for 30 years. I have a JoJan Multi-fletch. You can do the same with right wing or left wing with the JoJan straight fletch.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Deertaker

  • Trad Bowhunter
  • **
  • Posts: 150
Re: Straight fletch
« Reply #3 on: January 15, 2020, 10:51:31 PM »
I use straight and just offset like said previous, works great!

Offline txcookie

  • Trad Bowhunter
  • **
  • Posts: 251
Re: Straight fletch
« Reply #4 on: January 15, 2020, 11:58:23 PM »
So to get off set just use a straight clamp and shift the front?

Sent from my SM-G930V using Tapatalk

Is it deer season yet?

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Straight fletch
« Reply #5 on: January 16, 2020, 11:15:20 AM »
...and the rear. You may have to experiment a bit to see what works and flies best for you. Even straight fletch without offset will spin the arrow because of the resistance the feathers have but offsetting will give it a bit more...and a lot more isn't always the best. That why I suggest a bit of experimentation.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Online The Whittler

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2869
Re: Straight fletch
« Reply #6 on: January 16, 2020, 08:32:41 PM »
Tx, why is left wing an issue?

Offline txcookie

  • Trad Bowhunter
  • **
  • Posts: 251
Re: Straight fletch
« Reply #7 on: January 18, 2020, 12:26:32 PM »
Tx, why is left wing an issue?
I only have rightwing heliacal clamps.

Sent from my SM-G930V using Tapatalk

Is it deer season yet?

Online M60gunner

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 3025
Re: Straight fletch
« Reply #8 on: January 18, 2020, 02:31:52 PM »
If I am not mistaken instructions for setting up the jig are still available on the old JoJan website. I have one jig setup with straight clamps. I used to fletch all my family’s arrows with vanes using a straight offset. Not much just enough. They had no issues with arrow flight. I even did some arrows for my ASL using straight offset, after all that’s what Howard used.

Offline reddogge

  • Trad Bowhunter
  • **
  • Posts: 4926
Re: Straight fletch
« Reply #9 on: January 18, 2020, 03:23:47 PM »
A lot of people use an offset the width of the quill and it works and fits well on the shaft.
Traditional Bowhunters of Maryland
Heart of Maryland Bowhunters
NRA
Mayberry Archers

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Straight fletch
« Reply #10 on: January 18, 2020, 05:09:15 PM »
With too much offset you don't get good glue contact between the quill and shaft. I think the helical clamp probably eliminates that situation but straight fletching works just fine. You can also adjust the size or shape of the fletch to improve arrow flight and reduce noise if necessary.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Online Alexander Traditional

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3709
Re: Straight fletch
« Reply #11 on: January 18, 2020, 05:17:30 PM »
I did some with some low profile 4 inch bananas,and liked it. I just moved the front and back around until I got good contact with the shaft.

Offline Jon Stewart

  • Trad Bowhunter
  • **
  • Posts: 2567
Re: Straight fletch
« Reply #12 on: January 19, 2020, 07:17:15 AM »
Been fletching straight fletch for 50 years. I have taken a couple of animals with those arrows fletched that way.

Offline reddogge

  • Trad Bowhunter
  • **
  • Posts: 4926
Re: Straight fletch
« Reply #13 on: January 19, 2020, 10:36:12 AM »
This is the back half of a set of Duraflight glass arrows I had in the late 60s with straight, offset fletch. All were used up on deer kills.

Traditional Bowhunters of Maryland
Heart of Maryland Bowhunters
NRA
Mayberry Archers

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©