Author Topic: Lam thicknes  (Read 1025 times)

Offline mzombek

  • Trad Bowhunter
  • **
  • Posts: 123
Lam thicknes
« on: February 17, 2020, 05:53:11 PM »
I have made a few bows in the last couple of years. I had always let the supplier decide what lams I needed for a certain  length and poundage of the bow. Is there a chart stating the different thicknesses of lams needed for specific bow poundage?
Thanks for your help

Offline Buemaker

  • Trad Bowhunter
  • **
  • Posts: 3116

Offline mzombek

  • Trad Bowhunter
  • **
  • Posts: 123
Re: Lam thicknes
« Reply #2 on: February 17, 2020, 08:47:42 PM »
Are the chart for bingham’s bow design only

Offline buddyb

  • Trad Bowhunter
  • **
  • Posts: 205
Re: Lam thicknes
« Reply #3 on: February 17, 2020, 08:50:07 PM »
Yes but its a good starting point.
BuddyB

Offline monterey

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 4248
Re: Lam thicknes
« Reply #4 on: February 17, 2020, 09:08:55 PM »
The bows you have built are the best gude.
Monterey

"I didn't say all that stuff". - Confucius........and Yogi Berra

Online Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6075
Re: Lam thicknes
« Reply #5 on: February 18, 2020, 05:34:49 AM »
Every design will be different.
High on Archery.

Offline Flem

  • Trad Bowhunter
  • **
  • Posts: 2985
  • "Don't quote me on that!"
Re: Lam thicknes
« Reply #6 on: February 18, 2020, 09:43:03 AM »
Hate to be negative, but I after looking at the Bingham's chart for "Longbow's", I have to say that it's worthless. It gives no info on glass thickness, handle length, or dimensions other than length.
.389" for a 50#@ 68" Longbow? They using metal lams? It's way too vague to be useful. I can't speak to the other designs listed, but I would not touch the Longbow specs :readit: 

Offline buddyb

  • Trad Bowhunter
  • **
  • Posts: 205
Re: Lam thicknes
« Reply #7 on: February 18, 2020, 10:23:34 AM »
Flem, I know what your saying about the Bingham chart, It would be difficult to get accurate measurements for a bow.

The specs listed on the chart are specifically for the blue prints that Bingham sells. Elmont states that if anything changes from his blue prints those charts won't be accurate. 

The best way has been stated to build a bow or two then adjust lam thickness as needed.
BuddyB

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: Lam thicknes
« Reply #8 on: February 18, 2020, 10:30:02 AM »
Only sure way is to keep records of how YOUR bow comes out . The charts are just guidelines to start .

For example when I made the mod on my D/R longbow by adding an inch of reflex it made 5 lb difference .
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline Autumnarcher

  • Trad Bowhunter
  • **
  • Posts: 1169
Re: Lam thicknes
« Reply #9 on: February 18, 2020, 04:43:33 PM »
Frankly I was disappointed with pretty much everything I got from Binghams as far as plans and instructional materials. Very vague, video is an old grainy 30 yr old video and very little specifics on the process. The wrotten instruction booklet is just a written out version of the video narration.
 
...stood alone on a montaintop, starin out at a great divide, I could go east, I could go West, it was all up to me to decide, just then I saw a young hawk flyin and my soul began to rise......

Offline buckeyebowhunter

  • Trad Bowhunter
  • **
  • Posts: 1319
Re: Lam thicknes
« Reply #10 on: February 18, 2020, 09:00:32 PM »
Frankly I was disappointed with pretty much everything I got from Binghams as far as plans and instructional materials. Very vague, video is an old grainy 30 yr old video and very little specifics on the process. The wrotten instruction booklet is just a written out version of the video narration.
 

Not trying to bash Bingham's but I agree with this. I would not recommend buying the DVD. In regards to the original question most of my bows from Bingham's stacks came in about 5 or more lbs heavier than I had ordered. I'm having fun figuring up my own stacks and taking detailed notes as suggested.

Users currently browsing this topic:

0 Members and 3 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©