Author Topic: Stabilizing Resin  (Read 1492 times)

Online Tim Finley

  • Trad Bowhunter
  • **
  • Posts: 1031
Stabilizing Resin
« on: May 20, 2020, 10:40:31 AM »
I have been stabilizing wood with resin for a number of years, I have used mainly Cactus Juice, lately I used Stickfast and had good results .
  Getting ahold of someone at either place is hard no one answers the phone and if I leave a message no one returns my calls . I have been buying the resins off the E site . I  want to try another brand that may be more readily available and alittle less money 2 or 3 gallons doesn't last long and at over $100 a gallon it gets quite expensive . Has anyone tried BVV resin ? Is it the same as Stickfast and Cactus Juice ? Is it imported or made in the USA ?

Online Pine

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 4328
Re: Stabilizing Resin
« Reply #1 on: May 20, 2020, 12:02:06 PM »
Minwax Wood Hardener works and you can find it in most any hardware or home improvement store.

PS: it's acrylic desolved in acetone. You can make your own by filing plexiglass and putting it in the acetone.
It's easier to fool someone than to convince them they have been fooled. Mark Twain

If you're afraid to offend, you can't be honest.

TGMM Family of the Bow

Offline monterey

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 4248
Re: Stabilizing Resin
« Reply #2 on: May 20, 2020, 01:13:03 PM »
Minwax Wood Hardener works and you can find it in most any hardware or home improvement store.

PS: it's acrylic desolved in acetone. You can make your own by filing plexiglass and putting it in the acetone.

Who'd  a thunk that!  :)
Monterey

"I didn't say all that stuff". - Confucius........and Yogi Berra

Offline Flem

  • Trad Bowhunter
  • **
  • Posts: 2985
  • "Don't quote me on that!"
Re: Stabilizing Resin
« Reply #3 on: May 21, 2020, 09:21:34 AM »
I don't think I would use the Minwax or plexiglas dissolved in acetone with my vacuum pump. The seals are not made to be used with solvents, especially hot ones.

Online Tim Finley

  • Trad Bowhunter
  • **
  • Posts: 1031
Re: Stabilizing Resin
« Reply #4 on: May 21, 2020, 09:35:21 AM »
No that's not a vacuum type resin .

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Stabilizing Resin
« Reply #5 on: May 21, 2020, 10:39:27 AM »
I saw a guy on youtube with the minwax and a mason jar vacuum it into knife scales until the bubbles stopped.
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline monterey

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 4248
Re: Stabilizing Resin
« Reply #6 on: May 21, 2020, 12:21:48 PM »
I used the minwax to "foot" shafts by leaving them upright in 3 inches of hardener for a few hours.  It made a big difference in toughness.
Monterey

"I didn't say all that stuff". - Confucius........and Yogi Berra

Offline 4 point

  • Trad Bowhunter
  • **
  • Posts: 1238
Re: Stabilizing Resin
« Reply #7 on: May 21, 2020, 12:28:59 PM »
Personally I wouldn’t  use anything that isn’t catalyzed. A friend of mine stabilizes wood for turning. I’ll visit with him this weekend and see what he’s using. He said it was cheaper than cactus juice.
« Last Edit: May 21, 2020, 06:25:32 PM by 4 point »

Offline BigJim

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 3296
Re: Stabilizing Resin
« Reply #8 on: May 22, 2020, 10:49:16 PM »
You can order cactus juice off of his website. buy 4 gallons for about $280 including shipping.

I have used cactus juice, stickfast, and ultraseal. The bvv stuff in the blue jug is likely ultraseal but can't say for sure.

Of all, I liked the ultraseal the most and the stickfast the least, but they all worked well. I quit using the ultraseal mostly because the salesman was a dick! … and I had to order $4000 at a time to get it at a decent price.

I'm currently using cactus juice but am always open to new options.
BigJim
http://www.bigjimsbowcompany.com/      
I just try to live my life in a way that would have made my father proud.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©