Author Topic: 3 rivers tapering block mounting (Read 415 times)

flint kemper · « **on:** May 05, 2008, 09:37:00 PM »

Ok, let's see how everyone has there block mounted to there disc sander. I have mine clamped on but the clamp is in the way. Thanks for replies. Flint

Marvin M. · « **Reply #1 on:** May 06, 2008, 09:08:00 AM »

I just bought one myself. Haven't mounted it yet but was planning on using some "C" Clamps and putting the screw part underneath to keep it lower profile on the top.

I'll be watching to see what everyone else does.

Marvin

tenbrook · « **Reply #2 on:** May 06, 2008, 10:11:00 AM »

I am interested in this also. Throwing the tru-center taper tool in the trash!!!!!

Rich LaBombard · « **Reply #3 on:** May 09, 2008, 09:57:00 AM »

onemississipp · « **Reply #4 on:** May 09, 2008, 11:43:00 AM »

Here are a couple links not the 3 rivers but should get some ideas

http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=054414

http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=039867

News:

Author Topic: 3 rivers tapering block mounting (Read 415 times)

flint kemper

3 rivers tapering block mounting

Marvin M.

Re: 3 rivers tapering block mounting

tenbrook

Re: 3 rivers tapering block mounting

Rich LaBombard

Re: 3 rivers tapering block mounting

onemississipp

Re: 3 rivers tapering block mounting

Users currently browsing this topic:


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS