Glue for bow form.

[Buemaker]

There was a thread about this before, but I cannot find it. I am going to make a new bow form and am thinking about what kind of glue to use to glue up the cross plywood plates. I am thinking about the glue lines when it goes in the heat box. Earlier I have used a heat resistant glue, but I do not have that anymore. What do you use, will ordinary white glue and screws hold it together?

[Crooked Stic]

I use titebond with screws on plywood.

[Kirkll]

I use titebond with screws on plywood.

2X on white glue...But i would use epoxy on the edge banding.... And seal it well with Shellac or some wood sealer before use.

[Mad Max]

I use titebond with screws on plywood.

2X on white glue...But i would use epoxy on the edge banding.... And seal it well with Shellac or some wood sealer before use.

yep