3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Maple woodies  (Read 193 times)

Online frassettor

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 4635
Maple woodies
« on: June 11, 2008, 11:57:00 AM »
Just wondering if maple woods were durable, tough, and over all a good straight shaft for wood arrows. I want to get in the 650 gr range. I will be shooting a BW 58@28... Which I know they require a stiffer spine.   Thanks   :archer:
"Everything's fine,just fine". Dad

Online frassettor

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 4635
Re: Maple woodies
« Reply #1 on: June 11, 2008, 12:32:00 PM »
ttt
"Everything's fine,just fine". Dad

Offline Kevin L.

  • Trad Bowhunter
  • **
  • Posts: 1439
Re: Maple woodies
« Reply #2 on: June 11, 2008, 12:42:00 PM »
Mine are 11/32 29"BOP 60-65 and the total weight with 160gr up front is 800gr+/-. They had to be straightened in the beginning with heat, but have held up well. I tweak them every now and then, but they've stayed pretty straight.

For the weight you want, I'd look to ash, IMO.
Appalachian LB 66"57@26
Appalachian LB 68" 60@28
Appalachian Flatbow 64" 56@28
Appalachian Archery RC 58"62@28
Bighorn LB 68" 57@28
HH Wesley LB 66" 53@27
HH Cheetah LB 66" 52@26
Saxon American RC 58" 60@28

Offline Jeremy

  • Trad Bowhunter
  • **
  • Posts: 3242
Re: Maple woodies
« Reply #3 on: June 11, 2008, 01:53:00 PM »
Maple is good and tough.  So is ash.  My ash arrows are 11/32" 31" BOP 65-70 and with 125gr up front come up to 680-690 or so (shaft alone is 550-560gr).
>>>-TGMM Family Of The Bow-->
CT CE/FS Chief Instructor
"Death is not the greatest loss in life.  The greatest loss is what dies inside us while we live." - Norman Cousins

Offline cdworks

  • Trad Bowhunter
  • **
  • Posts: 98
Re: Maple woodies
« Reply #4 on: June 11, 2008, 03:13:00 PM »
how do you get maple down to 11/32 without a dowel maker?
C.D.Works

Online bruce

  • Trad Bowhunter
  • **
  • Posts: 24
Re: Maple woodies
« Reply #5 on: June 11, 2008, 03:59:00 PM »
cd i run my 3/8 maple dowels through a 7/16 die like you find in a tap and die set. and the sand off the grooves and they are usually real close to 11/32. chuck it up in a drill and spin them through. support the end that comes out cause it will whip around. run it through back and forth a few times and it will take it down. not very scientific but i have been using maple dowels for years made like this. raw shafts will fall in the upper 600 to 700 grains weight range. i usually shoot a bow in the low 60's for weight and 160 on the broadhead. they fly great. dont know the spine but they are stiff. i should spine them but i dont have a spine tester.(i know safety reasons).i love maple really tough and heavy.
bruce

Offline Chad Sivertsen

  • Trad Bowhunter
  • **
  • Posts: 140
Re: Maple woodies
« Reply #6 on: June 11, 2008, 05:28:00 PM »
I used maple some, they are heavy and durable but their weak point is straightness from my experience and unless you make your own the supply is limited and sporadic.

I would suggest ash as a better alternative IMO. 11/32 will meet your requirements.

5/16 hickory will give your spine and 28" raw shaft will weigh 500-550. Super tough but straightness is not a strong point of hickory either.

Maple, Ash, or hickory will work fine if the shafts are fairly straight.
Happy Trails,
Chad

Online frassettor

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 4635
Re: Maple woodies
« Reply #7 on: June 11, 2008, 07:56:00 PM »
ttt
"Everything's fine,just fine". Dad

Offline String Cutter

  • Trad Bowhunter
  • **
  • Posts: 1057
Re: Maple woodies
« Reply #8 on: June 12, 2008, 02:36:00 AM »
Ash rules.
Fatherhood is the greatest adventure a man can ever take.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©