3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Nocking Point  (Read 227 times)

Offline Bryant Hollinger

  • Trad Bowhunter
  • **
  • Posts: 55
Nocking Point
« on: August 05, 2008, 10:55:00 AM »
I have been hitting the target consistantly high at about 15 yards so I move my nocking point up to try to correct it. My nocking point is now almost 1 1/2 inch high, It looks really funny but I can now hit where I am looking.  This is a bow that I made myself (First one) and it could be tillered wrong. Anyone else have a nock point this high?

Offline aromakr

  • Trad Bowhunter
  • **
  • Posts: 727
Re: Nocking Point
« Reply #1 on: August 05, 2008, 11:03:00 AM »
Bryant:
You should be concerned with arrow flight with nock point placement, not where it hits on the target. If the arrow nock is porpoising up and down, when it comes out of the bow it needs adjusting. If not its correct. Could it be you are aiming too high?
Bob
Man must "believe" in something!  I "believe" I will go hunting-----

Offline Don Stokes

  • Tradbowhunter
  • Trad Bowhunter
  • *
  • Posts: 2607
Re: Nocking Point
« Reply #2 on: August 05, 2008, 08:52:00 PM »
I don't know if it applies in your situation, but you can effectively de-tune a bow by moving the nocking point up, allowing underspined arrows to shoot well, at least visually. Accuracy suffers. Is it possible your arrows are underspined? Normally if your nocking point is off you'll see it in the porpoising of the fletched arrow, if it's spined correctly. Shooting a bare shaft is a very good way to check nocking point.
Those who would give up essential liberty to purchase a little temporary safety deserve neither liberty nor safety.- Ben Franklin

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©